参数资料
型号: RPE5C2A681J2P1A03B
厂商: Murata Electronics North America
文件页数: 17/57页
文件大小: 0K
描述: CAP CER 680PF 100V 5% RADIAL
标准包装: 500
系列: RPE
电容: 680pF
电压 - 额定: 100V
容差: ±5%
温度系数: C0G,NP0
安装类型: 通孔
工作温度: -55°C ~ 125°C
应用: 通用
封装/外壳: 径向
尺寸/尺寸: 0.197" L x 0.098" W(5.00mm x 2.50mm)
高度 - 座高(最大): 0.197"(5.00mm)
引线间隔: 0.098"(2.50mm)
包装: 散装
引线型: 纽结
! Note ? Please read rating and ! CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
? This catalog has only typical speci?cations. Therefore, please approve our product speci?cations or transact the approval sheet for product speci?cations before ordering.
C49E.pdf
Mar.12,2014
Temperature Compensating Type Speci?cations and Test Methods
Continued from the preceding page.
1
No. AEC-Q200 Test Item
Specifications
AEC-Q200 Test Method
7
External Visual
No defects or abnormalities
Visual inspection
8
Physical Dimension Within the specified dimensions
Using calipers and micrometers.
9
Marking
To be easily legible.
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
Visual inspection
Per MIL-STD-202 Method 215
Solvent 1: 1 part (by volume) of isopropyl alcohol
10
Resistance Q
to Solvents
30pF V C: Q U 1,000
30pF G C: Q U 400+20C
3 parts (by volume) of mineral spirits
Solvent 2: Terpene defluxer
Solvent 3: 42 parts (by volume) of water
1 part (by volume) of propylene glycol
C: Nominal Capacitance (pF)
monomethyl ether
I.R.
More than 10,000M Ω or 500M Ω · μF (Whichever is smaller)
1 part (by volume) of monoethanolamine
Appearance No defects or abnormalities
30pF G C : Q U 400+20C
11
Mechanical
Shock
Capacitance Within the specified tolerance
30pF V C : Q U 1,000
Q
Three shocks in each direction should be applied along
3 mutually perpendicular axes of the test specimen (18 shocks).
The specified test pulse should be Half-sine and should
have a duration: 0.5ms, peak value: 1,500G and velocity
change: 4.7m/s.
C : Nominal Capacitance (pF)
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 2,000Hz.
12 Vibration
Q
30pF V C: Q U 1,000
30pF G C: Q U 400+20C
C: Nominal Capacitance (pF)
The frequency range, from 10 to 2,000Hz and return to 10Hz,
should be traversed in approximately 20min. This motion
should be applied for 12 items in each 3 mutually perpendicular
directions (total of 36 times).
Resistance to
Soldering Heat
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance No defects or abnormalities
13
Capacitance
Change
Within ±2.5% or ±0.25pF (Whichever is larger)
The lead wire is immersed in the melted solder 1.5 to 2mm
from the main body at 260±5°C for 10±1s. The specified items
are measured after 24±2h.
Dielectric
Strength
(Between
Terminals)
Thermal Shock
No defects
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance No defects or abnormalities
Perform the 300 cycles according to the two heat treatments
Capacitance
Change
Within ±5% or ±0.5pF (Whichever is larger)
listed in the following table (Maximum transfer time is 20s.).
Let sit for 24±2h at *room condition, then measure.
14
Q
30pF V C: Q U 350
10pF V C < 30p: Q U 275+5C/2
10pF G C: Q U 200+10C
Step
Temp. (°C)
Time (min.)
1
-55+0/-3
15±3
2
125+3/-0
15±3
C: Nominal Capacitance (pF)
I.R.
1,000M Ω or 50M Ω · μF min. (Whichever is smaller)
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
15 ESD
Q
30pF V C: Q U 1,000
30pF G C: Q U 400+20C
Per AEC-Q200-004
C: Nominal Capacitance (pF)
I.R.
More than 10,000M Ω or 500M Ω · μF (Whichever is smaller)
Should be placed into steam aging for 8h±15min.
The terminal of capacitor is dipped into a solution of ethanol
16 Solderability
Lead wire should be soldered with uniform coating on the axial
direction over 95% of the circumferential direction.
(JIS K 8101) and rosin (JIS K 5902) (25% rosin in weight
propotion). Immerse in solder solution for 2±0.5 seconds.
In both cases the depth of dipping is up to about 1.5 to 2mm
from the terminal body.
* “room condition” Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
15
相关PDF资料
PDF描述
RPE5C2A681J2M2A03A CAP CER 680PF 100V 5% RADIAL
PIC18LF4320T-I/ML IC MCU FLASH 4KX16 EEPROM 44QFN
RPE5C2A681J2M1A03A CAP CER 680PF 100V 5% RADIAL
RPE5C2A681J2K1A03B CAP CER 680PF 100V 5% RADIAL
PIC16LC774-I/PQ IC MCU OTP 4KX14 A/D PWM 44-MQFP
相关代理商/技术参数
参数描述
RPE5C2A681J2P1B03A 功能描述:多层陶瓷电容器MLCC - 含引线 680pF 100volts C0G 5% 2.5mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPE5C2A681J2P1B03B 功能描述:多层陶瓷电容器MLCC - 含引线 680pF 100volt C0G +/-5% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPE5C2A681J2P1Y03B 功能描述:多层陶瓷电容器MLCC - 含引线 680pF 100volt C0G +/-5% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPE5C2A681J2S1A03A 功能描述:多层陶瓷电容器MLCC - 含引线 680PF 100Volts 5% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPE5C2A681J2S1B03A 功能描述:多层陶瓷电容器MLCC - 含引线 680pF 100volts C0G 5% 2.5mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型: