- 您现在的位置：买卖IC网 > PDF目录219500 > S-1200B22-A6T1U 2.2 V FIXED POSITIVE LDO REGULATOR, 0.31 V DROPOUT, PDSO6 PDF资料下载
参数资料
| 型号： | S-1200B22-A6T1U |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 2.2 V FIXED POSITIVE LDO REGULATOR, 0.31 V DROPOUT, PDSO6 |
| 封装： | HALOGEN FREE AND LEAD FREE, HSNT-6 |
| 文件页数： | 2/36页 |
| 文件大小： | 427K |
| 代理商： | S-1200B22-A6T1U |
第1页当前第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
S-1200 Series
Rev.5.0_00
Seiko Instruments Inc.
10
Standard Circuit
ON/OFF
VSS
VOUT
VIN
CIN
*1
CL
*2
Input
Output
GND
Single GND
*1. CIN is a capacitor for stabilizing the input.
*2. A ceramic capacitor of 0.1
μF or more can be used for C
L.
Figure
11
Caution The above connection diagram and constant will not guarantee successful operation.
Perform thorough evaluation using the actual application to set the constant.
Application Conditions
Input capacitor (CIN):
0.1
μF or more
Output capacitor (CL):
0.1
μF or more
ESR of output capacitor:
1.0
Ω or less
Caution A general series regulator may oscillate, depending on the external components selected.
Check that no oscillation occurs with the application using the above capacitor.
Selection of Input and Output Capacitors (CIN, CL)
The S-1200 Series requires an output capacitor between the VOUT and VSS pins for phase compensation.
Operation is stabilized by a ceramic capacitor with an output capacitance of 0.1
μF or more in the entire
temperature range.
However, when using an OS capacitor, tantalum capacitor, or aluminum electrolytic
capacitor, a ceramic capacitor with a capacitance of 0.1
μF or more and an ESR of 1.0 Ω or less is required.
The value of the output overshoot or undershoot transient response varies depending on the value of the output
capacitor.
The required capacitance of the input capacitor differs depending on the application.
The recommended value for an application is 0.1
μF or more for C
IN and 0.1 μF or more for CL; however, when
selecting the output capacitor, perform sufficient evaluation, including evaluation of temperature characteristics,
on the actual device.
相关PDF资料 |
PDF描述 |
|---|---|
| S-1200B22-I6T2U | 2.2 V FIXED POSITIVE LDO REGULATOR, 0.31 V DROPOUT, PDSO6 |
| S-1200B22-M5T1U | 2.2 V FIXED POSITIVE LDO REGULATOR, 0.31 V DROPOUT, PDSO5 |
| S-1200B40-A6T1U | 4 V FIXED POSITIVE LDO REGULATOR, 0.19 V DROPOUT, PDSO6 |
| S-1200B40-I6T2U | 4 V FIXED POSITIVE LDO REGULATOR, 0.19 V DROPOUT, PDSO6 |
| S-1200B40-M5T1U | 4 V FIXED POSITIVE LDO REGULATOR, 0.19 V DROPOUT, PDSO5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-1200B22-I6T2G | 功能描述:低压差稳压器 - LDO Linear LDO reg Hi 18uA Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1200B22-M5T1G | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 18uA Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1200B22-M5T1U | 功能描述:IC REG LINEAR 150MA SOT23-5 制造商:ablic u.s.a. inc. 系列:* 包装:剪切带（CT） 零件状态:在售 稳压器数:1 电流 - 输出:150mA 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商器件封装:SOT-23-5 标准包装:1 |
| S-1200B23-A6T1S | 制造商:Seiko Instruments Inc (SII) 功能描述:LINEAR LDO REG HI 18UA IQ 150MA IOUT |
| S-1200B23-I6T2G | 功能描述:低压差稳压器 - LDO Linear LDO reg Hi 18uA Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。