- 您现在的位置：买卖IC网 > PDF目录219504 > S-1323B31PF-N8QTFGG 3.1 V FIXED POSITIVE LDO REGULATOR, 0.65 V DROPOUT, PDSO4 PDF资料下载
参数资料
| 型号： | S-1323B31PF-N8QTFGG |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 3.1 V FIXED POSITIVE LDO REGULATOR, 0.65 V DROPOUT, PDSO4 |
| 封装： | LEAD FREE, SNT-4 |
| 文件页数： | 6/28页 |
| 文件大小： | 322K |
| 代理商： | S-1323B31PF-N8QTFGG |
第1页第2页第3页第4页第5页当前第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
HIGH RIPPLE-REJECTION AND SMALL PACKAGE CMOS VOLTAGE REGULATOR
S-1323 Series
Rev.5.0_00
14
Seiko Instruments Inc.
Precautions
Wiring patterns for the VIN, VOUT and GND pins should be designed so that the impedance is low.
When mounting an output capacitor between the VOUT and VSS pins (CL) and a capacitor for stabilizing
the input between VIN and VSS pins (CIN), the distance from the capacitors to these pins should be as
short as possible.
Note that the output voltage may increase when a series regulator is used at low load current (1.0 mA or
less).
Generally a series regulator may cause oscillation, depending on the selection of external parts. The
following conditions are recommended for this IC. However, be sure to perform sufficient evaluation
under the actual usage conditions for selection, including evaluation of temperature characteristics.
Input capacitor (CIN):
1.0
μF or more
Output capacitor (CL):
1.0
μF or more
Equivalent series resistance (ESR): 10
Ω or less
The voltage regulator may oscillate when the impedance of the power supply is high and the input
capacitor is small or an input capacitor is not connected.
The application conditions for the input voltage, output voltage, and load current should not exceed the
package power dissipation.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
electrostatic protection circuit.
In determining the output current, attention should be paid to the output current value specified in Table
5 in the electrical characteristics and footnote *5 of the table.
SII claims no responsibility for any disputes arising out of or in connection with any infringement by
products including this IC of patents owned by a third party.
相关PDF资料 |
PDF描述 |
|---|---|
| S-1701V3227-M5T1G | 3.2 V FIXED POSITIVE LDO REGULATOR, 0.21 V DROPOUT, PDSO5 |
| S-812C38AMC-C2ST2U | 3.8 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO5 |
| S-812C38AUA-C2ST2U | 3.8 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PSSO3 |
| S-812C38BMC-C4ST2U | 3.8 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO5 |
| S-812C38BPI-C4STFU | 3.8 V FIXED POSITIVE LDO REGULATOR, 0.35 V DROPOUT, PDSO6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-1323B32NB-N8RTFG | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 70uA Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1323B32PF-N8RTFG | 制造商:Seiko Instruments Inc (SII) 功能描述:LINEAR LDO REG HI 70UA IQ 150MA IOUT |
| S-1323B33NB-N8S-TF | 功能描述:低压差稳压器 - LDO 3.3 V 1% 70uV RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1323B33NB-N8STFG | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 70uA Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1323B33NB-N8STFU | 功能描述:IC REG LINEAR 150MA SC82AB 制造商:ablic u.s.a. inc. 系列:* 包装:剪切带（CT） 零件状态:在售 稳压器数:1 电流 - 输出:150mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-82A，SOT-343 供应商器件封装:SC-82AB 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。