- 您现在的位置：买卖IC网 > PDF目录219501 > S-1701D3025-U5T1U 3 V FIXED POSITIVE LDO REGULATOR, 0.21 V DROPOUT, PDSO5 PDF资料下载
参数资料
| 型号： | S-1701D3025-U5T1U |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 3 V FIXED POSITIVE LDO REGULATOR, 0.21 V DROPOUT, PDSO5 |
| 封装： | HALOGEN FREE AND LEAD FREE, SOT-89, 5 PIN |
| 文件页数： | 28/71页 |
| 文件大小： | 582K |
| 代理商： | S-1701D3025-U5T1U |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页当前第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION
S-1701 Series
Rev.3.0_00
Seiko Instruments Inc.
34
Selection of Input and Output Capacitors (CIN, CL)
The S-1701 Series requires an output capacitor between the VOUT and VSS pins for phase compensation. A ceramic
capacitor with a capacitance of 1.0
μF or more provides a stable operation in all temperature ranges. When using an OS
capacitor, tantalum capacitor, or aluminum electrolytic capacitor, a capacitor with a capacitance of 1.0
μF or more and an
ESR of 10
Ω or less is required.
The output overshoot and undershoot values, which are transient response characteristics, vary depending on the output
capacitor value. The required capacitance value for the input capacitor differs depending on the application.
The recommended application values are CIN = 1.0
μF or more and CL = 1.0 μF or more, however, perform thorough
evaluation using the actual device, including evaluation of temperature characteristics.
Explanation of Terms
Regulator block
1. Low dropout voltage regulator
The low dropout voltage regulator is a voltage regulator whose dropout voltage is low due to its built-in low on-
resistance transistor.
2. Low ESR
A capacitor whose ESR (Equivalent Series Resistance) is low. The S-1701 Series enables use of a low ESR capacitor,
such as a ceramic capacitor, for the output-side capacitor (CL). A capacitor whose ESR is 10
Ω or less can be used.
3. Output voltage (VOUT)
The accuracy of the output voltage is ensured at
±1.0% under the specified conditions of fixed input voltage
*1, fixed
output current, and fixed temperature.
*1. Differs depending on the product.
Caution If the above conditions change, the output voltage value may vary and exceed the accuracy range of
the output voltage. Please see the electrical characteristics and attached characteristics data for
details.
4. Line regulation
ΔVOUT1
ΔVINVOUT
Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output
voltage changes due to a change in the input voltage with the output current remaining unchanged.
5. Load regulation (
ΔVOUT2)
Indicates the dependency of the output voltage on the output current. That is, the values show how much the output
voltage changes due to a change in the output current with the input voltage remaining unchanged.
6. Dropout voltage (Vdrop)
Indicates the difference between the input voltage VIN1, which is the input voltage (VIN) at the point where the output
voltage has fallen to 98% of the output voltage value VOUT3 after VIN was gradually decreased from VIN = VOUT(S)
+ 1.0
V, and the output voltage at that point (VOUT3
× 0.98).
Vdrop = VIN1
(VOUT3 × 0.98)
相关PDF资料 |
PDF描述 |
|---|---|
| S-1701M1815-M5T1U | 1.8 V FIXED POSITIVE LDO REGULATOR, 0.38 V DROPOUT, PDSO5 |
| S-1701N5015-U5T1U | 5 V FIXED POSITIVE LDO REGULATOR, 0.21 V DROPOUT, PDSO5 |
| S-1701P1515-M5T1U | 1.5 V FIXED POSITIVE LDO REGULATOR, 0.58 V DROPOUT, PDSO5 |
| S-1701P1515-U5T1U | 1.5 V FIXED POSITIVE LDO REGULATOR, 0.58 V DROPOUT, PDSO5 |
| S-1701Q3315-M5T1U | 3.3 V FIXED POSITIVE LDO REGULATOR, 0.21 V DROPOUT, PDSO5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-1701D3026-M5T1G | 功能描述:低压差稳压器 - LDO Combo Volt Detct/Reg 85uA Iq 400mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1701D3026-U5T1G | 功能描述:低压差稳压器 - LDO Combo Volt Detec/Reg 85uA Iq 400mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1701D3326-M5T1G | 功能描述:低压差稳压器 - LDO Combo Volt Detct/Reg 85uA Iq 400mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1701D3326-U5T1G | 功能描述:低压差稳压器 - LDO Combo Volt Detec/Reg 85uA Iq 400mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-1701D3327-M5T1G | 功能描述:低压差稳压器 - LDO Combo Volt Detct/Reg 85uA Iq 400mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。