- 您现在的位置：买卖IC网 > PDF目录219504 > S-814A49AMC-BDNT2U 4.9 V FIXED POSITIVE LDO REGULATOR, 0.22 V DROPOUT, PDSO5 PDF资料下载
参数资料
| 型号： | S-814A49AMC-BDNT2U |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 4.9 V FIXED POSITIVE LDO REGULATOR, 0.22 V DROPOUT, PDSO5 |
| 封装： | HALOGEN FREE AND LEAD FREE, SOT-23, 5 PIN |
| 文件页数： | 6/32页 |
| 文件大小： | 627K |
| 代理商： | S-814A49AMC-BDNT2U |
第1页第2页第3页第4页第5页当前第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
LOW DROPOUT CMOS VOLTAGE REGULATOR
S-814 Series
Rev.3.0_00
Seiko Instruments Inc.
14
Selection of Output Capacitor (CL)
Mount an output capacitor between VOUT pin and VSS pin for phase compensation. The S-814 Series
enables customers to use a ceramic capacitor as well as a tantalum or an aluminum electrolytic capacitor.
A ceramic capacitor or an OS capacitor:
Use a capacitor of 0.47
μF or more.
A tantalum or an aluminum electrolytic capacitor:
Use a capacitor of 0.47
μF or more and ESR of 10 Ω or less.
Pay special attention not to cause an oscillation due to an increase in ESR at low temperatures, when
you use the aluminum electrolytic capacitor.
Evaluate the capacitor taking into consideration its
performance including temperature characteristics.
Overshoot and undershoot characteristics differ depending upon the type of the output capacitor you
select. Refer to “CL dependencies of overshoot” and “CL dependencies of undershoot” in
“ Transient Response Characteristics”.
Precautions
Wiring patterns for VIN pin, VOUT pin and GND pin should be designed so that the impedance is low.
When mounting an output capacitor, the distance from the capacitor to the VOUT pin and the VSS pin
should be as short as possible.
Note that output voltage may increase when a series regulator is used at low load current (Less than 10
μA).
Generally, a series regulator may cause oscillation, depending on the selection of external parts. The
following conditions are recommended for this IC. However, be sure to perform sufficient evaluation under
the actual usage conditions to select the series regulator.
Output capacitor (CL):
0.47
μF or more
Equivalent Series Resistance (ESR): 10
Ω or less
Input series resistance (RIN):
10
Ω or less
The voltage regulator may oscillate when the impedance of the power supply is high and the input
capacitor is small or an input capacitor is not connected.
The application conditions for input voltage and load current do not exceed the power dissipation level of
the package.
In determining the output current, attention should be paid to the output current value specified and
footnote *3 in Table 5 in the “ Electrical Characteristics”.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
electrostatic protection circuit.
SII claims no responsibility for any and all disputes arising out of or in connection with any infringement by
products including this IC of patents owned by a third party.
相关PDF资料 |
PDF描述 |
|---|---|
| S-814A49AUC-BDNT2U | 4.9 V FIXED POSITIVE LDO REGULATOR, 0.22 V DROPOUT, PDSO5 |
| S-814A51AMC-BDPT2U | 5.1 V FIXED POSITIVE LDO REGULATOR, 0.21 V DROPOUT, PDSO5 |
| S-814A51AUC-BDPT2U | 5.1 V FIXED POSITIVE LDO REGULATOR, 0.21 V DROPOUT, PDSO5 |
| S-814A55AMC-BDTT2U | 5.5 V FIXED POSITIVE LDO REGULATOR, 0.2 V DROPOUT, PDSO5 |
| S-814A55AUC-BDTT2U | 5.5 V FIXED POSITIVE LDO REGULATOR, 0.2 V DROPOUT, PDSO5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-814A49AUC-BDNT2G | 功能描述:低压差稳压器 - LDO Linear LDO Regulator 30uA Iq 180mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-814A50AMC-BDO-T2 | 功能描述:低压差稳压器 - LDO 5.0V 30uA 2.0% RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-814A50AMC-BDOT2G | 功能描述:低压差稳压器 - LDO 5.0V 30uA 2.0% RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-814A50AMC-BDOT2U | 功能描述:IC REG LINEAR 5V 0.18A SOT23-5 制造商:ablic u.s.a. inc. 系列:* 包装:剪切带（CT） 零件状态:在售 稳压器数:1 电流 - 输出:180mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商器件封装:SOT-23-5 标准包装:1 |
| S-814A50AUC-BDO-T2 | 功能描述:低压差稳压器 - LDO 5.0V 30uA 2.0% RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。