- 您现在的位置：买卖IC网 > PDF目录219503 > S-817A24ANB-CUN-T2G 2.4 V FIXED POSITIVE LDO REGULATOR, 0.67 V DROPOUT, PDSO4 PDF资料下载
参数资料
| 型号： | S-817A24ANB-CUN-T2G |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 2.4 V FIXED POSITIVE LDO REGULATOR, 0.67 V DROPOUT, PDSO4 |
| 封装： | LEAD FREE, SC-82AB, 4 PIN |
| 文件页数： | 7/53页 |
| 文件大小： | 826K |
| 代理商： | S-817A24ANB-CUN-T2G |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页
SUPER-SMALL PACKAGE CMOS VOLTAGE REGULATOR
Rev.5.0_00
S-817 Series
Seiko Instruments Inc.
15
Operation
1. Basic Operation
Figure 14 shows the block diagram of the S-817 Series.
The error amplifier compares the reference voltage (Vref) with Vfb, which is the output voltage resistance-
divided by feedback resistors Rs and Rf. It supplies the output transistor with the gate voltage necessary
to ensure a certain output voltage free of any fluctuations of input voltage and temperature.
Reference voltage
circuit
VOUT
*1
VSS
VIN
Rs
Rf
Error
amplifier
Current
supply
Vref
+
Vfb
*1. Parasitic diode
Figure 14
2. Output Transistor
The S-817 series uses a P-channel MOS FET as the output transistor.
Be sure that VOUT does not exceed VIN+0.3 V to prevent the voltage regulator from being damaged due to
inverse current flowing from VOUT pin through a parastic diode to VIN pin.
3. Short Circuit Protection
The S-817A series incorporates a short circuit protection to protect the output transistor against short
circuit between VOUT pin and VSS pin. Installation of the short-circuit protection which protects the
output transistor against short-circuit between VOUT and VSS can be selected in the S-817A series. The
short-circuit protection controls output current as shown in the “Typical Characteristics 1.”. Output
Voltage versus Output Current, and suppresses output current at about 40 mA even if VOUT and VSS
pins are short-circuited.
The short-circuit protection can not be a thermal protection at the same time. Attention should be paid to
the Input voltage and the load current under the actual condition so as not to exceed the power
dissipation of the package including the case for short-circuit.
When the output current is large and the difference between input and output voltage is large even if not
shorted, the short-circuit protection may work and the output current is suppressed to the specified value.
For details, refer to “
Characteristics (Typical Data) 3. Maximum Output Current vs. Input
Voltage”.
In addition, S-817B series is removing a short-circuit protection, and is the product which enabled it to
pass large current.
相关PDF资料 |
PDF描述 |
|---|---|
| S-817A24APF-CUNTFGG | 2.4 V FIXED POSITIVE LDO REGULATOR, 0.67 V DROPOUT, PDSO4 |
| S-817A43ANB-CVG-T2G | 4.3 V FIXED POSITIVE LDO REGULATOR, 0.3 V DROPOUT, PDSO4 |
| S-817A43APF-CVGTFGG | 4.3 V FIXED POSITIVE LDO REGULATOR, 0.3 V DROPOUT, PDSO4 |
| S-817A52ANB-CVP-T2G | 5.2 V FIXED POSITIVE LDO REGULATOR, 0.25 V DROPOUT, PDSO4 |
| S-817A54ANB-CVR-T2G | 5.4 V FIXED POSITIVE LDO REGULATOR, 0.25 V DROPOUT, PDSO4 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-817A24APF-CUNTFG | 功能描述:低压差稳压器 - LDO Linear LDO regulator 1.2uA Iq 75mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-817A25ANB-CUO-T2 | 功能描述:低压差稳压器 - LDO 2.5V 1.2uA 2.0% RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-817A25ANB-CUOT2G | 功能描述:低压差稳压器 - LDO 2.5V 1.2uA 2.0% RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-817A25ANB-CUOT2U | 功能描述:IC REG LINEAR 35MA SC82AB 制造商:ablic u.s.a. inc. 系列:* 包装:剪切带（CT） 零件状态:在售 稳压器数:1 电流 - 输出:35mA 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:SC-82A，SOT-343 供应商器件封装:SC-82AB 标准包装:1 |
| S-817A25APF-CUOTFG | 功能描述:低压差稳压器 - LDO Linear LDO regulator 1.2uA Iq 75mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。