- 您现在的位置：买卖IC网 > PDF目录243966 > S-8338ABCA-P8T1G 0.16 A SWITCHING CONTROLLER, 1246.3 kHz SWITCHING FREQ-MAX, PDSO8 PDF资料下载
参数资料
| 型号： | S-8338ABCA-P8T1G |
| 元件分类： | 稳压器 |
| 英文描述： | 0.16 A SWITCHING CONTROLLER, 1246.3 kHz SWITCHING FREQ-MAX, PDSO8 |
| 封装： | LEAD FREE, SON-8 |
| 文件页数： | 5/51页 |
| 文件大小： | 446K |
| 代理商： | S-8338ABCA-P8T1G |
第1页第2页第3页第4页当前第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页
STEP-UP, 1.2 MHz HIGH-FREQUENCY, PWM CONTROL SWITCHING REGULATOR CONTROLLER
Rev.4.0_00
S-8337/8338 Series
Seiko Instruments Inc.
13
3. Shutdown pin (S-8338 Series only)
This pin stops or starts step-up operations.
Switching the shutdown pin to the “L” level stops operation of all the internal circuits and reduces the
current consumption significantly.
DO NOT use the shutdown pin in a floating state because it is not pulled up or pulled down internally.
DO NOT apply voltage of between 0.3 V and 1.8 V to the shutdown pin because applying such a
voltage increases the current consumption. If the shutdown pin is not used, connect it to the VIN pin.
Table 7
Shutdown Pin
CR Oscillator
Output Voltage
“H”
Operates
Fixed
“L”
Stopped
V
IN
*1
*1. Voltage of VIN from which the voltage drop from the
DC resistance of the inductor and the forward
voltage of the diode are subtracted
ON/OFF
VIN
VSS
Figure 9
4. Timer latch short-circuit protection function
This IC has a timer latch short-circuit protection circuit that stops the switching operation when the
output voltage drops for a specific time due to output short-circuiting. A capacitor (CSP) that is used
to set the delay time of this short-circuit protection circuit is connected to the CSP pin.
This IC operates at the maximum duty ratio if the output voltage drops due to output short-circuiting.
At the maximum duty ratio, constant-current charging of CSP starts. If this status lasts for a specific
time and the CSP pin voltage rises above the reference voltage (1 V), the latch mode is set. Note that
the latch mode is different from the shutdown status in that the switching operation is stopped but the
internal circuitry operates normally.
To reset the latch operation to protect the IC from short-circuiting, either lower VIN to the timer latch
reset voltage or lower or lower the level of the shutdown pin to “L”. Note that the latch operation is not
reset even if VIN falls below the UVLO voltage.
5. UVLO function
This IC includes a UVLO (under-voltage lockout) circuit to prevent the IC from malfunctioning due to a
transient status when power is applied or a momentary drop of the supply voltage. When UVLO is in
the detection state, switching is stopped and the external FET is held in the off status. Once UVLO
enters the detection state, the soft-start function is reset.
Note that the other internal circuits operate normally and that the status is different from the power-off
status.
相关PDF资料 |
PDF描述 |
|---|---|
| S-80132ANPF-JCRTFGG | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4 |
| SC101R8KT | 1 ELEMENT, 1.8 uH, GENERAL PURPOSE INDUCTOR |
| SC10820KT | 1 ELEMENT, 82 uH, GENERAL PURPOSE INDUCTOR |
| SC153R9K | 1 ELEMENT, 2.3 uH, GENERAL PURPOSE INDUCTOR |
| SC156R8KT | 1 ELEMENT, 6.8 uH, GENERAL PURPOSE INDUCTOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-8338ABCB-P8T1G | 制造商:Seiko Instruments Inc (SII) 功能描述:STEPUP1.2MHZ PWM SWR |
| S-8338ABDA-T8T1G | 制造商:Seiko Instruments Inc (SII) 功能描述:STEP-UP, 1.2 MHZ HIGH-FREQUENCY, PWM CONTROL - Tape and Reel |
| S-8338ACAC-P8T1G | 制造商:Seiko Instruments Inc (SII) 功能描述:STEPUP1.2MHZ PWM SWR |
| S-8338ACBB-P8T1G | 制造商:Seiko Instruments Inc (SII) 功能描述:STEPUP1.2MHZ PWM SWR |
| S-8338ACBC-P8T1G | 制造商:Seiko Instruments Inc (SII) 功能描述:STEPUP1.2MHZ PWM SWR |
发布紧急采购，3分钟左右您将得到回复。