- 您现在的位置：买卖IC网 > PDF目录297336 > S-T111B39MC-OGYTFU 3.9 V FIXED POSITIVE LDO REGULATOR, 0.26 V DROPOUT, PDSO5 PDF资料下载
参数资料
| 型号： | S-T111B39MC-OGYTFU |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 3.9 V FIXED POSITIVE LDO REGULATOR, 0.26 V DROPOUT, PDSO5 |
| 封装： | HALOGEN FREE AND LEAD FREE, SOT-23, 5 PIN |
| 文件页数： | 22/23页 |
| 文件大小： | 225K |
| 代理商： | S-T111B39MC-OGYTFU |
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-T111 Series
Rev.3.0_00
Seiko Instruments Inc.
8
Standard Circuit
ON/OFF
VSS
VOUT
VIN
CIN
*1
CL
*2
Input
Output
GND
Single GND
*1. CIN is a capacitor for stabilizing the input.
*2. A ceramic capacitor of 0.1
μF or more can be used for C
L.
Figure
9
Caution The above connection diagram and constant will not guarantee successful operation.
Perform thorough evaluation using the actual application to set the constant.
Application Conditions
Input capacitor (CIN):
0.1
μF or more
Output capacitor (CL):
0.1
μF or more
ESR of output capacitor:
10
Ω or less
Caution A general series regulator may oscillate, depending on the external components selected.
Check that no oscillation occurs with the application using the above capacitor.
Selection of Input and Output Capacitors (CIN, CL)
The S-T111 Series requires an output capacitor between the VOUT and VSS pins for phase compensation.
Operation is stabilized by a ceramic capacitor with an output capacitance of 0.1
μF or more in the entire
temperature range.
However, when using an OS capacitor, tantalum capacitor, or aluminum electrolytic
capacitor, a ceramic capacitor with a capacitance of 0.1
μF or more and an ESR of 10 Ω or less is required.
The value of the output overshoot or undershoot transient response varies depending on the value of the output
capacitor.
The required capacitance of the input capacitor differs depending on the application.
The recommended value for an application is 1.0
μF or more for C
IN and 0.47 μF or more for CL; however,
when selecting the output capacitor, perform sufficient evaluation, including evaluation of temperature
characteristics, on the actual device.
相关PDF资料 |
PDF描述 |
|---|---|
| S-T111B40MC-OGZTFU | 4 V FIXED POSITIVE LDO REGULATOR, 0.26 V DROPOUT, PDSO5 |
| S-T111B36MC-OGV-TFG | 3.6 V FIXED POSITIVE LDO REGULATOR, 0.26 V DROPOUT, PDSO5 |
| S-T111B48MC-OHH-TFG | 4.8 V FIXED POSITIVE LDO REGULATOR, 0.26 V DROPOUT, PDSO5 |
| S-T111B27MC-OGMTFU | 2.7 V FIXED POSITIVE LDO REGULATOR, 0.29 V DROPOUT, PDSO5 |
| S-T111B29MC-OGOTFU | 2.9 V FIXED POSITIVE LDO REGULATOR, 0.26 V DROPOUT, PDSO5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S-T111B40MC-OGZTFG | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 50uA Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-T111B40MC-OGZTFU | 功能描述:IC REG LINEAR 150MA SOT23-5 制造商:ablic u.s.a. inc. 系列:* 包装:剪切带（CT） 零件状态:在售 电流 - 输出:150mA 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商器件封装:SOT-23-5 标准包装:1 |
| S-T111B41MC-OHATFG | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 50uA Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-T111B42MC-OHBTFG | 功能描述:低压差稳压器 - LDO Linear LDO Reg Hi 50uA Iq 150mA Iout RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| S-T111B42MC-OHBTFU | 功能描述:IC REG LINEAR 150MA SOT23-5 制造商:ablic u.s.a. inc. 系列:* 包装:剪切带（CT） 零件状态:在售 电流 - 输出:150mA 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商器件封装:SOT-23-5 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。