- 您现在的位置：买卖IC网 > PDF目录7524 > S112S01F (Sharp Microelectronics)RELAY SSR 120VAC 12A TRIAC 4-SIP PDF资料下载
参数资料
| 型号： | S112S01F |
| 厂商： | Sharp Microelectronics |
| 文件页数： | 8/13页 |
| 文件大小： | 0K |
| 描述： | RELAY SSR 120VAC 12A TRIAC 4-SIP |
| 标准包装： | 200 |
| 系列： | S112 |
| 电路： | SPST-NO（1 Form A） |
| 输出类型： | AC |
| 负载电流： | 12A |
| 输入电压： | 1.2VDC |
| 电压 - 负载： | 0 ~ 120 V |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 封装/外壳： | 4-SIP |
| 供应商设备封装： | 4-SIP |
| 包装： | 散装 |
| 继电器类型： | 继电器 |
| 其它名称： | 425-2397-5 |
S112S01 Series
S212S01 Series
■ Design Considerations
● Recommended Operating Conditions
Parameter
Symbol
Conditions
MIN.
MAX.
Unit
Input
Input signal current at ON state
Input signal current at OFF state
I F (ON)
I F (OFF)
?
?
16
0
24
0.1
mA
mA
Load supply voltage
S112S01
S212S01
V OUT (rms)
?
80
80
120
240
V
Output
Load supply current
I OUT (rms)
Locate snubber circuit between output terminals
(Cs = 0.1 μ F, Rs = 47 ? )
0.1
I T (rms)
× 80%( ? )
mA
Frequency
Operating temperature
f
T opr
?
?
47
? 20
63
80
Hz
?C
( ? ) See Fig.2 about derating curve (I T (rms) vs. ambient temperature).
● Design guide
In order for the SSR to turn off, the triggering current (l F ) must be 0.1mA or less.
In phase control applications or where the SSR is being by a pulse signal, please ensure that the pulse width
is a minimum of 1ms.
When the input current (I F ) is below 0.1mA, the output Triac will be in the open circuit mode. However, if the
voltage across the Triac, V D , increases faster than rated dV/dt, the Triac may turn on. To avoid this situation,
please incorporate a snubber circuit. Due to the many different types of load that can be driven, we can
merely recommend some circuit vales to start with : Cs=0.1 μ F and Rs=47 ? . The operation of the SSR and
snubber circuit should be tested and if unintentional switching occurs, please adjust the snubber circuit com-
ponent values accordingly.
When making the transition from On to Off state, a snubber circuit should be used ensure that sudden drops
in current are not accompanied by large instantaneous changes in voltage across the Triac.
This fast change in voltage is brought about by the phase difference between current and voltage.
Primarily, this is experienced in driving loads which are inductive such as motors and solenoids.
Following the procedure outlined above should provide sufficient results.
Any snubber or Varistor used for the above mentioned scenarios should be located as close to the main out-
put triac as possible.
The load current should be within the bounds of derating curve. (Refer to Fig.2)
Also, please use the optional heat sink when necessary.
In case the optional heat sink is used and the isolation voltage between the device and the optional heat sink
is needed, please locate the insulation sheet between the device and the heat sink.
When the optional heat sink is equipped, please set up the M3 screw-fastening torque at 0.3 to 0.5N?m.
In order to dissipate the heat generated from the inside of device effectively, please follow the below sugges-
tions.
(a) Make sure there are no warps or bumps on the heat sink, insulation sheet and device surface.
(b) Make sure there are no metal dusts or burrs attached onto the heat sink, insulation sheet and device sur-
face.
(c) Make sure silicone grease is evenly spread out on the heat sink, insulation sheet and device surface.
Sheet No.: D4-A02501EN
8
相关PDF资料 |
PDF描述 |
|---|---|
| TQ2SL-1.5V | RELAY TELECOM DPDT 2A 1.5V |
| 1183010 | CONN FERRULE DIN 18AWG RED |
| G6JU-2FL-Y-TR DC24 | RELAY TELECOM DPDT 1A 24V |
| PVDZ172NS-TPBF | IC RELAY PHOTOVO 60V 1.5A 8-SMD |
| 4303.0181 | SOCKET PWR ENTRY 2POLE SCREW 8MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| S112S02 | 制造商:SHARP 制造商全称:Sharp Electrionic Components 功能描述:SIP Type SSR for Medium Power Control |
| S112WW/R | 制造商:Brady Corporation 功能描述:SIGN FIRE EXIT KEEP CLEAR 300X600 制造商:Brady Corporation 功能描述:SIGN, FIRE EXIT KEEP CLEAR, 300X600 |
| S112WW/S | 制造商:Brady Corporation 功能描述:SIGN FIRE EXIT KEEP CLEAR 300X600 制造商:Brady Corporation 功能描述:SIGN, FIRE EXIT KEEP CLEAR, 300X600 |
| S113 | 制造商:DFX 功能描述:STRIPLIGHT LED 600MM COLD PEARL |
| S-1130A | 功能描述:SWITCH ROTARY DIP 16-POS TOP RoHS:是 类别:开关 >> DIP 系列:S-1000A 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT |
发布紧急采购，3分钟左右您将得到回复。