参数资料
型号: S1C63158D0A010P
元件分类: 微控制器/微处理器
英文描述: 4-BIT, FLASH, 4 MHz, MICROCONTROLLER, UUC53
封装: DIE-53
文件页数: 3/159页
文件大小: 1200K
代理商: S1C63158D0A010P
92
EPSON
S1C63808 TECHNICAL MANUAL
CHAPTER 4: PERIPHERAL CIRCUITS AND OPERATION (Serial Interface)
SDP1: Serial interface 1 data input/output permutation select register (FF6AHD0)
SDP2: Serial interface 2 data input/output permutation select register (FF1AHD0)
Selects the serial data input/output permutation.
When "1" is written: MSB first
When "0" is written: LSB first
Reading: Valid
Select whether the data input/output permutation will be MSB first or LSB first.
At initial reset, this register is set to "0".
STPB1: Serial interface 1 stop bit select register (FF6AHD1)
STPB2: Serial interface 2 stop bit select register (FF1AHD1)
Selects the stop bit length for asynchronous data transfer.
When "1" is written: 2 bits
When "0" is written: 1 bit
Reading: Valid
STPBx is the stop bit select register that is effective in asynchronous mode. When "1" is written to STPBx,
the stop bit length is set to 2 bits, and when "0" is written, it is set to 1 bit.
In clock synchronous mode, no start/stop bits can be added to transfer data. Therefore, STPBx is ineffec-
tive.
At initial reset, STPBx is set to "0" (1 bit).
EPR1: Serial interface 1 parity enable register (FF65HD3)
EPR2: Serial interface 2 parity enable register (FF15HD3)
Selects the parity function.
When "1" is written: With parity
When "0" is written: Non parity
Reading: Valid
Selects whether or not to check parity of the received data and to add a parity bit to the transmitting data.
When "1" is written to EPRx, the most significant bit of the received data is considered to be the parity bit
and a parity check is executed. A parity bit is added to the transmitting data. When "0" is written, neither
checking is done nor is a parity bit added.
Parity is valid only in asynchronous mode and the EPRx setting becomes invalid in the clock synchro-
nous mode.
At initial reset, this register is set to "0".
PMD1: Serial interface 1 parity mode selection register (FF65HD2)
PMD2: Serial interface 2 parity mode selection register (FF15HD2)
Selects odd parity/even parity.
When "1" is written: Odd parity
When "0" is written: Even parity
Reading: Valid
When "1" is written to PMDx, odd parity is selected and even parity is selected when "0" is written. The
parity check and addition of a parity bit is only valid when "1" has been written to EPRx. When "0" has
been written to EPRx, the parity setting by PMDx becomes invalid.
At initial reset, this register is set to "0".
相关PDF资料
PDF描述
S1C7XXXF00E199 16-BIT, 90 MHz, RISC MICROCONTROLLER, PQFP
S2041 PHOTO TRANSISTOR DETECTOR
S3P44R10 TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX
S3S12P128J0VQK 16-BIT, MROM, 1.05 MHz, MICROCONTROLLER, PQFP80
MC9S12P128J0CFTR 16-BIT, FLASH, 1.05 MHz, MICROCONTROLLER, QCC48
相关代理商/技术参数
参数描述
S1C63408 制造商:EPSON 制造商全称:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63557D04Q000 制造商:Seiko Instruments Inc (SII) 功能描述:EPSON MCU 4BIT
S1C63567 制造商:EPSON 制造商全称:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63616 制造商:EPSON 制造商全称:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63632 制造商:EPSON 制造商全称:EPSON 功能描述:4-bit Single Chip Microcomputer