参数资料
型号: S6468-52
元件分类: 光电元器件
英文描述: LINEAR OUTPUT PHOTO DETECTOR
封装: TO-18, 3 PIN
文件页数: 2/2页
文件大小: 121K
代理商: S6468-52
Si PIN photodiode with preamp
S6468-52
0
0.1
1
10
FREQUENCY (MHz)
OUTPUT
NOISE
DENSITY
(nV/Hz
1/2
)
100
1000
(Typ.Ta=25 C, RL=10 k
, CL=3 pF, Vcc=5 V)
10
20
30
40
50
60
70
80
90
100
-30
0.1
1
100
10
1000
-10
-20
(Typ. Ta=25 C, RL=10 k
, CL=3 pF, VCC=5 V)
0
10
RELATIVE
SENSITIVITY
(dB)
FREQUENCY (MHz)
200
WAVELENGTH (nm)
PHOTO
SENSITIVITY
(mV/
W)
400
600
800
1000
1200
(Typ.Ta=25 C, RL=10 k
, CL=3 pF)
0
2
4
6
8
10
I Spectral response
KPINB0193EB
I Frequency response
KPINB0194EA
I Output noise density characteristic
KPINB0195EB
I Basic circuit connection
Vcc
GND
Vsignal
RL
CL
CB
Vcc
KPINC0001EA
I Dimensional outline (unit: mm)
13.5
3.6
±
0.2
2.8
5.4 ± 0.2
WINDOW
3.0 ± 0.1
4.7 ± 0.1
PHOTOSENSITIVE
SURFACE
2.54 ± 0.2
0.45
LEAD
Vcc
GND (CASE)
V signal
KPINA0001EF
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvgen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. 2003 Hamamatsu Photonics K.K.
Cat. No. KPIN1054E04
Feb. 2003 DN
2
G ESD
S6468-52 may be damaged or their performance may deteriorate by such factors as electro static discharge from the human body, surge
voltages from measurement equipment, leakage voltages from soldering irons and packing materials, etc. As a countermeasure against
electro static discharge, the device, operator, work place and measuring jigs must all be set at the same potential. The following precautions
must be observed during use:
To protect the device from electro static discharge which accumulate on the operator or the operator's clothes, use a wrist strap or similar
tools to ground the operator's body via a high impedance resistor (1 M
).
A semiconductive sheet (1 M
to 100 M) should be laid on both the work table and the floor in the work area.
When soldering, use an electrically grounded soldering iron with an isolation resistance of more than 10 M
.
For containers and packing, use of a conductive material or aluminum foil is effective. When using an antistatic material, use one with a
resistance of 0.1 M
/cm2 to 1 G/cm2.
G Wiring
RL and CL are the total resistive load and capacitive load, as seen from the OUT terminal. When connecting a cable or circuit to the latter
stage of the basic connection diagram, the cable or circuit resistance and capacitance should also be taken into account.
Use RL
≥10 k and CL≤3 pF according to the recommended operating conditions.
Also connect a bypass capacitor (CB=0.01 F to 0.1 F ceramic capacitor) between the VCC lead and GND lead.
The lead length should be less than 5 mm.
If electric current or voltage is applied in reverse polarity to an electronic device such as a preamplifier, this can degrade device
performance or destroy the device. Always check the wiring and dimensional outline to avoid misconnection.
Precautions for use
相关PDF资料
PDF描述
S7183 LINEAR OUTPUT PHOTO DETECTOR
S7184 LINEAR OUTPUT PHOTO DETECTOR
S7379-01 PIN PHOTO DIODE
S7600A SERIAL COMM CONTROLLER, PQFP48
S7720-PI 8-BIT, 8.2 MHz, OTHER DSP, PDIP28
相关代理商/技术参数
参数描述
S647 制造商:POWERBOX 制造商全称:Powerbox 功能描述:350 WATTS DC/DC SINGLE OUTPUT
S648 制造商:POWERBOX 制造商全称:Powerbox 功能描述:350 WATTS DC/DC SINGLE OUTPUT
S648D8T 制造商:MAJOR 功能描述:
S649 制造商:POWERBOX 制造商全称:Powerbox 功能描述:350 WATTS DC/DC SINGLE OUTPUT
S64I3NDA1 制造商:STEC Inc 功能描述: