Publication Number S71PL-J_00
Revision B
Amendment 5
Issue Date July 17, 2007
Note: This product has been retired and is not recommended for new designs. For new designs, S71GL-A or S71GL-N
supersedes S71PL-J. Please contact your local Spansion sales office to determine the appropriate migration device,
specifications, and ordering information. Availability of this document is retained for reference and historical
purposes only.
Features
Power supply voltage of 2.7 V to 3.1 V
High performance
– 65 ns (65 ns Flash, 70 ns pSRAM)
Packages
– 7 x 9 x 1.2mm 56 ball FBGA
– 8 x 11.6 x 1.2mm 64 ball FBGA
– 8 x 11.6 x 1.4mm 84 ball FBGA
Operating Temperature
– –25°C to +85°C
– –40°C to +85°C
General Description
The S71PL series is a product line of stacked Multi-Chip Product (MCP) packages and consists of:
One or more S29PL (Simultaneous Read/Write) Flash memory die
pSRAM or SRAM
The 256Mb Flash memory consists of two S29PL127J devices. In this case, CE#f2 is used to access the second Flash and no
extra address lines are required.
The products covered by this document are listed in the table below:
Notes
1. Not recommended for new designs; contact your local Spansion sales representative for details.
2. Not recommended for new designs: use S71PL127N and S71PL256N instead.
S71PL-J Based MCPs
Stacked Multi-Chip Product (MCP) Flash Memory and
RAM
256M/128/64/32 Megabit (16/8/4/2M x 16-bit) CMOS 3.0 Volt-only
Simultaneous Operation Page Mode Flash Memory and
64/32/16/8/4 Megabit (4M/2M/1M/512K/256K x 16-bit)
Static RAM/pSRAM
Data Sheet
Flash Memory Density
pSRAM Density
4 Mb
S71PL032J40
8 Mb
S71PL032J80
S71PL064J80
16 Mb
S71PL032JA0
S71PL064JA0
32 Mb
S71PL064JB0
S71PL127JB0
64 Mb
S71PL127JC0
S71PL254JC0
Flash Memory Density
32Mb
64Mb
4 Mb
S71PL032J04
8 Mb
S71PL032J08
S71PL064J08
16 Mb
S71PL064J0A