
3
Cat. No. KPIC1040E03 Aug. 2009 DN
Photo IC diode
S7565
www.hamamatsu.com
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein.
Type numbers of products listed in the specification sheets or supplied as samples may have a suffix “(X)” which means tentative specifications or a suffix “(Z)”
which means developmental specifications. 2009 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvgen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
5.2 ± 0.3
(Including burr)
Center of
active area
Visual-
compensation
filter
(2.6 × 3.9 × 0.5 t)
5.2
±
0.3
(Including
burr)
(Specified at the lead out)
Photosensitive
surface
Anode
(Anode)
NC
Cathode
2.0
(Depth 0.15 Max.)
1.0
(Depth 0.15 Max.)
2.5 ± 0.2
5.0
2.02
±
0.2
5.0
16.5
±
1.0
(0.8)
(1.0)
1.27 1.27 1.27
10°
5°
0.75
±
0.15
10°
5°
3.6
Max.
0.25
+0.15
-0.1
0.55
0.45
1.0
2.0
Pin be connected to
on the PC board.
Tolerance unless otherwise
noted: ±0.1, ±2°
Shaded area indicates burr.
Values in parentheses are not
guaranteed, but for reference.
Lead surface finish: silver plating
Packing: polyethylene pack [anti-static type]
(200 pcs/pack)
KPICA0025EA
Dimensional outline (unit: mm)
Note: If excessive vibration is continuously applied to the glass lter, there is a risk that the lter may come off, so secure the glass lter
with a holder.
Use this device in a way that allows light to enter only through the lter.