参数资料
型号: S87C51FB
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PQFP44
封装: QFP-44
文件页数: 9/20页
文件大小: 1578K
代理商: S87C51FB
8XC51FX
PROGRAMMING ALGORITHM
Refer to Table 4 and Figures 10 and 11 for address,
data, and control signals set up. To program the
87C51FX the following sequence must be exercised.
1. Input the valid address on the address lines.
2. Input the appropriate data byte on the data
lines.
3. Activate the correct combination of control sig-
nals.
4. Raise EA/V PP from VCC to 12.75V g0.25V.
5. Pulse, ALE/PROG 5 times for the EPROM ar-
ray, and 25 times for the encryption table and
the lock bits.
Repeat 1 through 5 changing the address and data
for the entire array or until the end of the object file is
reached.
PROGRAM VERIFY
Program verify may be done after each byte or block
of bytes is programmed. In either case a complete
verify of the programmed array will ensure reliable
programming of the 87C51FX.
The lock bits cannot be directly verified. Verification
of the lock bits is done by observing that their fea-
tures are enabled.
272322±21
Figure 11. Programming Signals Waveforms
ROM and EPROM Lock System
The 87C51FX program lock system, when pro-
grammed, protects the onboard program against
software piracy.
The 83C51FX has a one-level program lock system
and a 64-byte encryption table. See line 2 of Table
5. If program protection is desired, the user submits
the encryption table with their code, and both the
lock-bit and encryption array are programmed by the
factory. The encryption array is not available without
the lock bit. For the lock bit to be programmed, the
user must submit an encryption table. The 83C51FA
does not have protection features.
The 87C51FX has a 3-level program lock system
and a 64-byte encryption array. Since this is an
EPROM device, all locations are user-programma-
ble. See Table 5.
Table 5. Program Lock Bits and the Features
Program Lock Bits
ProtectIon Type
LB1
LB2
LB3
1
U
No Program Lock features enabled. (Code verify will still be encrypted by the
Encryption Array if programmed.)
2
P
U
MOVC instructions executed from external program memory are disabled from
fetching code bytes from internal memory, EA is sampled and latched on Reset, and
further programming of the EPROM is disabled.
3
P
U
Same as 2, also verify is disabled.
4
P
Same as 3, also external execution is disabled.
Any other combination of the lock bits is not defined.
17
相关PDF资料
PDF描述
S87C51FC 8-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PQFP44
S83C51FA-24 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP44
S80C51FA-1 8-BIT, 16 MHz, MICROCONTROLLER, PQFP44
S83C51FA-33 8-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP44
S87C51FA-2 8-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
S87C51FB-1 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
S87C51FB1SF76 功能描述:IC MCU 8BIT 16K OTP 44-MQFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:87C 其它有关文件:STM32F101T8 View All Specifications 特色产品:STM32 32-bit Cortex MCUs 标准包装:490 系列:STM32 F1 核心处理器:ARM? Cortex?-M3 芯体尺寸:32-位 速度:36MHz 连通性:I²C,IrDA,LIN,SPI,UART/USART 外围设备:DMA,PDR,POR,PVD,PWM,温度传感器,WDT 输入/输出数:26 程序存储器容量:64KB(64K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:10K x 8 电压 - 电源 (Vcc/Vdd):2 V ~ 3.6 V 数据转换器:A/D 10x12b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:36-VFQFN,36-VFQFPN 包装:托盘 配用:497-10030-ND - STARTER KIT FOR STM32497-8853-ND - BOARD DEMO STM32 UNIV USB-UUSCIKSDKSTM32-PL-ND - KIT IAR KICKSTART STM32 CORTEXM3497-8512-ND - KIT STARTER FOR STM32F10XE MCU497-8505-ND - KIT STARTER FOR STM32F10XE MCU497-8304-ND - KIT STM32 MOTOR DRIVER BLDC497-6438-ND - BOARD EVALUTION FOR STM32 512K497-6289-ND - KIT PERFORMANCE STICK FOR STM32MCBSTM32UME-ND - BOARD EVAL MCBSTM32 + ULINK-MEMCBSTM32U-ND - BOARD EVAL MCBSTM32 + ULINK2更多... 其它名称:497-9032STM32F101T8U6-ND
S87C51FB-2 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
S87C51FB-20 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
S87C51FB-24 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller