| ‘lllvVISHAYQVSA2B-E3, SA2D-E3, SA2G-E3, SA2J-E3, SA2K-E3, SA2M-E3Vishay General SemiconductorSurface Mount Glass Passivated Rectifier?@RoHSCOMPUANTLow profile packageIdeal for automated placementGlass passivated chip junctionLow forward voltage dropLow leakage currentHigh forward surge capability www.vishay.com Q Do_214Ac (sMA) FEATURES Meets MSL level 1, per J-STD-020, LF maximum peak of260 °C 0 Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 WPICAL APPLIcATIoNs PRIMARY cHARAcTERI Ics For use in general purpose rectification of power Supplies,inverters, converters and freewheeling diodes for consumer 100 V, 200 V, 400 V, 600 V,800 V, 1000 V and telecommunication. MEcHANIcAL DATACase: Do-214AC (SMA)Molding compound meets UL 94 V-0 flammability ratingBase P/N-E3 — RoHS-compliant, commercial grade VF at lF:2.0A Terminals: Matte tin plated leads. solderable perJ-STD?0O2 and JESD 22?B‘l02E3 suffix meets JESD 201 Class 1A whisker test DO-214AC (SMA) Sing'e die Polarity: Color band denotes the cathode end MAXIMUM RATIRGs (TA = 25 ac unless otherwise noted) PARAMETER Device marking code Max. repetitive peak reverse voltage Average forward current Peak fonlvard surge current 10 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range -55tO+150 ELEcTRIcAL cHARAcTERIsTIcs HA = 25 0C u nless otherwise noted) PARAMETER TEST coNDITIoNS Instantaneous forward voltage Reverse current Rated VRIF 0.5 A, IR : 1.0 A, Typical reverse recovery time I" : 0.25 A Typical junction capacitance 4.0 V, 1 MHZ Notes ll) Pulse test: 300 ps pulse width, 1 % duty cycle (2) Pulse test: Pulse width g 40 ms Revision: 14-Aug-13 1 Document Number: 88969 For technical questions within your region: DiodesAmericas@vishay.corn, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT To CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.gomzdoc?9100!! |