参数资料
型号: SAB-C515C-LM
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 8-BIT, 10 MHz, MICROCONTROLLER, PQFP80
封装: PLASTIC, MQFP-80
文件页数: 57/98页
文件大小: 1117K
代理商: SAB-C515C-LM
C515C
Data Sheet
56
2003-02
Power Saving Modes
The C515C provides two basic power saving modes, the idle mode and the power down
mode. Additionally, a slow down mode is available. This power saving mode reduces the
internal clock rate in normal operating mode and it can be also used for further power
reduction in idle mode.
Idle mode
The CPU is gated off from the oscillator. All peripherals are still provided with the clock
and are able to work. Idle mode is entered by software and can be left by an interrupt
or reset.
Power down mode
The operation of the C515C is completely stopped and the oscillator is turned off. This
mode is used to save the contents of the internal RAM with a very low standby current.
Software power down mode: Software power down mode is entered by software
and can be left by reset or by a short low pulse at pin P3.2/INT0 (or P4.7/RXDC,
C515C-8E only).
Hardware power down mode: Hardware power down mode is entered when the pin
HWPD is put to low level.
Slow-down mode
The controller keeps up the full operating functionality, but its normal clock frequency
is internally divided by 32. This slows down all parts of the controller, the CPU and all
peripherals, to 1/32th of their normal operating frequency. Slowing down the frequency
significantly reduces power consumption. The slow down mode can be combined with
the idle mode.
Table 11 gives a general overview of the entry and exit conditions of the power saving
modes.
In the power down mode of operation,
VDD can be reduced to minimize power
consumption. It must be ensured, however, that
VDD is not reduced before the power
down mode is invoked, and that
VDD is restored to its normal operating level, before the
power down mode is terminated.
If e.g. the idle mode is left through an interrupt, the microcontroller state (CPU, ports,
peripherals) remains preserved. If a power saving mode is left by a hardware reset, the
microcontroller state is disturbed and replaced by the reset state of the C515C.
If WS (bit 4) is SFR PCON1 is set (C515C-8E only), pin P4.7/RXDC is alternatively
selected as wake-up pin for the software power down mode. If WS (bit 4) is SFR PCON1
is cleared (C515C-8E only), pin P3.2/INT0 is selected as wake-up pin for the software
power down mode.
For the C515C-8R, P3.2/INT0 is always selected as wake-up pin.
相关PDF资料
PDF描述
SAB-XC164CM-8F40F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
SAB-XC164CM-4F40F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
SAB-XC164CM-8F20F 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
SAB-XC164KM-4F40F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
SAB-XC164KM-4F20F 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
SAB-C515-L24M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Microcontroller
SAB-C515-LM 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Microcontroller
SAB-C517A 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-bit CMOS MICROCONTROLLER
SAB-C517A-4R24M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Microcontroller
SAB-C517A-4RM 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Microcontroller