参数资料
型号: SAB80C537-M-T85
厂商: SIEMENS A G
元件分类: 微控制器/微处理器
英文描述: 8-BIT, 12 MHz, MICROCONTROLLER, PQFP100
封装: PLASTIC, MQFP-100
文件页数: 43/61页
文件大小: 1054K
代理商: SAB80C537-M-T85
SAB 80C517/80C537
Semiconductor Group
47
Notes for pages 44, 45 and 46:
1) Capacitive loading on ports 0 and 2 may cause spurious noise pulses to be superimposed
on the VOL of ALE and ports 1, 3, 4, 5 and 6. The noise is due to external bus capacitance
discharging into the port 0 and port 2 pins when these pins make 1-to-0 transitions during
bus operation.
In the worst case (capacitive loading > 100 pF), the noise pulse on ALE line may exceed
0.8 V. In such cases it may be desirable to qualify ALE with a schmitt-trigger, or use an
address latch with a schmitt- trigger strobe input.
2) Capacitive loading on ports 0 and 2 may cause the VOH on ALE and PSEN to momentarily
fall below the 0.9 VCC specification when the address lines are stabilizing.
3) Power down IPD is measured with all output pins disconnected;
EA = RESET = VCC; Port 0 = Port 7 = Port 8 = VCC; XTAL1 = N.C.; XTAL2 = VSS;
VAGND= N.C.; VAREF = VCC; PE/SWD = OWE = VSS.
4) ICC (active mode) is measured with all output pins disconnected; XTAL2 driven with clock
signal according to the figure below; XTAL1 = N.C.;
EA = OWE = PE/SWD = VCC; Port 0 = Port 7 = Port 8 = VCC;
RESET = VSS. ICC would be slightly higher if a crystal oscillator is used.
5) ICC (idle mode,) is measured with all output pins disconnected and with all peripherals
disabled; XTAL2 driven with clock signal according to the figure below; XTAL1 = N.C.;
RESET = OWE = VCC; Port 0 = Port 7 = Port 8 = VCC; EA = PE/SWD = VSS.
ICC (slow down mode) is measured with all output pins disconnected and with all peripherals
disabled;
XTAL2 driven with clock signal according to the figure below; XTAL = N.C.;
Port 7 = Port 8 = VCC; EA = PE/SWD = VSS.
6) ICC (max.) at other frequencies is given by: active mode: ICC max = 3.1 * fOSC + 3.0
idle mode: ICC max = 1.0 * fOSC + 3.0
Where fOSC is the oscillator frequency in MHz. ICC values are given in mA and measured at
VCC = 5 V (see also notes 4 and 5).
7) The output impedance of the analog source must be low enough to assure full loading of the
sample capacitance (CI) during load time (TL). After charging of the internal capacitance (CI)
in the load time (TL) the analog input must be held constant for the rest of the sample time
(TS).
8) The differential impedance
RD of the analog reference voltage source must be less than
1k
at reference supply voltage.
9) Exceeding the limit values at one or more input channels will cause additional current which
is sinked sourced at these channels. This may also affect the accuracy of other channels
which are operated within the specification.
10) Only valid for not selected analog inputs.
11) No missing code.
相关PDF资料
PDF描述
SAB82258A-1-R 4 CHANNEL(S), 10 MHz, DMA CONTROLLER, CQCC68
SAB82258A-R 4 CHANNEL(S), 8 MHz, DMA CONTROLLER, CQCC68
SAB82258A-1-R 4 CHANNEL(S), 10 MHz, DMA CONTROLLER, CQCC68
SAB82C212-12N DRAM CONTROLLER, PQCC84
SAB88C166-5M 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
SAB80C537N 制造商:Infineon Technologies AG 功能描述:MCU 8-Bit C500 8051 CISC ROMLess 5V 84-Pin PLCC 制造商:Infineon Technologies AG 功能描述:8BIT CPU 12MHZ SMD 80C537 PLCC84
SAB80C537-N 功能描述:IC MIRCROCONTROLLER 8BIT 84PLCC RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:260 系列:73S12xx 核心处理器:80515 芯体尺寸:8-位 速度:24MHz 连通性:I²C,智能卡,UART/USART,USB 外围设备:LED,POR,WDT 输入/输出数:9 程序存储器容量:64KB(64K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:2K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 5.5 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-VFQFN 裸露焊盘 包装:管件
SAB80C537-N16 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Single-Chip Microcontroller
SAB80C537-N-T40/85 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Single-Chip Microcontroller
SAB82257N 制造商:n/a 功能描述:82257 SIE 48 HOURS