参数资料
型号: SAB82525N
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 2 CHANNEL(S), 4M bps, MULTI PROTOCOL CONTROLLER, PQCC44
封装: PLASTIC, LCC-44
文件页数: 117/126页
文件大小: 730K
代理商: SAB82525N
Semiconductor Group
90
SAB 82525
SAB 82526
SAF 82525
SAF 82526
TMD … Timer Mode
The operation mode of the internal timer is set.
0 … external mode
The timer is controlled by the CPU and can be started at any time setting the STI bit in
CMDR.
1 … internal mode
The timer is used internally by the HSCX for time-out and retry conditions in auto-mode.
(refer to the description of the TIMR register)
RAC … Receiver Active
Switches the receiver to inoperational state.
0 … HDLC receiver inactive
1 … HDLC receiver active
In extended transparent modes this bit must be reset to enable fully transparent reception!
RTS … Request To Send
Defines the state and control of RTS pin.
0 … The RTS pin is controlled by the HSCX autonomously.
RTS is activated when a frame transmission starts and deactivated after the transmission
operation is completed.
1 … The RTS pin is controlled by the CPU.
If this bit is set, the RTS pin is activated immediately and remains active till this bit is reset
(not valid in bus configuration).
TRS … Timer Resolution
The resolution of the internal timer (factor k, see description of TIMR register) is selected
0 …
k = 32.768
1 …
k = 512
RxD is disconnected from the mechanical pin and internally connected to TxD of the same
channel. TxD pin remains active.
TLP … Test Loop
相关PDF资料
PDF描述
SAB8289-P 8 MHz, BUS ARBITER AND CONT SIG GEN, PDIP20
SAB82C171-35-P PALETTE-DAC DSPL CTLR, PDIP28
SAB82C176-40-P PALETTE-DAC DSPL CTLR, PDIP28
SAB82C206-N MULTIFUNCTION PERIPHERAL, PQCC84
SAB82C215-12N SPECIALTY MICROPROCESSOR CIRCUIT, PQCC84
相关代理商/技术参数
参数描述
SAB82525N-V2.1 制造商:Siemens 功能描述:82525N-V2.1
SAB82525NV2.1GHSCX 制造商:Infineon Technologies AG 功能描述:
SAB82525N-V2.1GHSCX 制造商:Infineon Technologies AG 功能描述:
SAB82525NV2.1HSCX 制造商:Rochester Electronics LLC 功能描述:- Bulk
SAB82525NV2.2 功能描述:输入/输出控制器接口集成电路 T/E RoHS:否 制造商:Silicon Labs 产品: 输入/输出端数量: 工作电源电压: 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:QFN-64 封装:Tray