SAB 80C166W/83C166W
Semiconductor Group
45
Absolute Maximum Ratings
Ambient temperature under bias (
T
A):
SAB 83C166W-5M, SAB 80C166W-M ........................................................................... 0 to + 70 C
SAB 83C166W-5M-T3, SAB 80C166W-M-T3 ........................................................... – 40 to + 85 C
SAB 83C166W-5M-T4, SAB 80C166W-M-T4 .........................................................– 40 to + 110 C
Storage temperature (
T
stg) ....................................................................................... – 65 to + 150 C
Voltage on
V
CC pins with respect to ground (VSS) ..................................................... – 0.5 to + 6.5 V
Voltage on any pin with respect to ground (
V
SS) .................................................– 0.5 to VCC + 0.5 V
Input current on any pin during overload condition .................................................. – 10 to + 10 mA
Absolute sum of all input currents during overload condition ............................................. |100 mA|
Power dissipation........................................................................................................................ 1 W
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent
damage to the device. This is a stress rating only and functional operation of the device at
these or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability. During overload conditions (
V
IN > VCC or VIN < VSS) the
voltage on pins with respect to ground (
V
SS) must not exceed the values defined by the
Absolute Maximum Ratings.
Parameter Interpretation
The parameters listed in the following partly represent the characteristics of the SAB 80C166W/
83C166W and partly its demands on the system. To aid in interpreting the parameters right, when
evaluating them for a design, they are marked in column “Symbol”:
CC (Controller Characteristics):
The logic of the SAB 80C166W/83C166W will provide signals with the respective timing
characteristics.
SR (System Requirement):
The external system must provide signals with the respective timing characteristics to the SAB
80C166W/83C166W.