参数资料
型号: SAF-XC164CM-8F40F
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
封装: 0.50 MM PITCH, GREEN, PLASTIC, TQFP-64
文件页数: 48/70页
文件大小: 2001K
代理商: SAF-XC164CM-8F40F
XC164CM
Derivatives
Electrical Parameters
Data Sheet
50
V1.4, 2007-03
Parameter Interpretation
The parameters listed in the following partly represent the characteristics of the
XC164CM and partly its demands on the system. To aid in interpreting the parameters
right, when evaluating them for a design, they are marked in column “Symbol”:
CC (Controller Characteristics):
The logic of the XC164CM will provide signals with the respective characteristics.
SR (System Requirement):
The external system must provide signals with the respective characteristics to the
XC164CM.
5) Overload conditions occur if the standard operating conditions are exceeded, i.e. the voltage on any pin
exceeds the specified range:
VOV > VDDP + 0.5 V (IOV > 0) or VOV < VSS - 0.5 V (IOV < 0). The absolute sum of
input overload currents on all pins may not exceed 50 mA. The supply voltages must remain within the
specified limits.
Proper operation is not guaranteed if overload conditions occur on functional pins such as XTAL1.
6) Not subject to production test - verified by design/characterization.
7) An overload current (
IOV) through a pin injects a certain error current (IINJ) into the adjacent pins. This error
current adds to the respective pin’s leakage current (
IOZ). The amount of error current depends on the overload
current and is defined by the overload coupling factor
KOV. The polarity of the injected error current is inverse
compared to the polarity of the overload current that produces it.
The total current through a pin is |
ITOT| = |IOZ| + (|IOV| × KOV). The additional error current may distort the input
voltage on analog inputs.
8) The timing is valid for pin drivers operating in default current mode (selected after reset). Reducing the output
current may lead to increased delays or reduced driving capability (
CL).
相关PDF资料
PDF描述
SAK-XC164CM-8F40F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
SAK-XC164CM-8F20F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
SAF-XC164D-8R20F 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP100
SAF-XC164D-16F40F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP100
SAF-XC164D-8F40F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
SAF-XC164CM-8F40F AA 功能描述:16位微控制器 - MCU 16 BIT FLASH RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
SAF-XC164CM-8F40F AA TR 制造商:Infineon Technologies AG 功能描述:
SAF-XC164CM-8F40FAA 功能描述:16位微控制器 - MCU RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
SAFXC164CM8F40FAAXT 制造商:Infineon Technologies AG 功能描述:MCU 16-Bit XC166 CISC/DSP/RISC 64KB Flash 2.5V/5V 64-Pin TQFP
SAF-XC164CR-32F20F 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller with C166SV2 Core