参数资料
型号: SAF-XC164D-32R40F
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP100
封装: 0.50 MM PITCH, GREEN, PLASTIC, TQFP-100
文件页数: 61/75页
文件大小: 1136K
代理商: SAF-XC164D-32R40F
XC164D-32
Derivatives
Electrical Parameters
Data Sheet
62
V1.0, 2006-08
4.3.2
On-chip Flash Operation
The XC164D’s Flash module delivers data within a fixed access time (see Table 15).
Accesses to the Flash module are controlled by the PMI and take 1 + WS clock cycles,
where WS is the number of Flash access waitstates selected via bitfield WSFLASH in
register IMBCTRL. The resulting duration of the access phase must cover the access
time
t
ACC of the Flash array. Therefore, the required Flash waitstates depend on the
available speed grade as well as on the actual system frequency.
Note: The Flash access waitstates only affect non-sequential accesses. Due to
prefetching mechanisms, the performance for sequential accesses (depending on
the software structure) is only partially influenced by waitstates.
In typical applications, eliminating one waitstate increases the average
performance by 5% … 15%.
Example: For an operating frequency of 40 MHz (clock cycle = 25 ns), Standard devices
must be operated with 2 waitstates: ((2 + 1)
× 25 ns) ≥ 70 ns.
indicates the interrelation of waitstates, system frequency, and speed grade.
Note: The maximum achievable system frequency is limited by the properties of the
respective derivative, i.e. 40 MHz (or 20 MHz for xxx-32F20F devices).
Table 15
Flash Characteristics
(Operating Conditions apply)
Parameter
Symbol
Limit Values
Unit
Min.
Typ.
Max.
Flash module access time (Standard)
t
ACC
CC
701)
1) The actual access time is also influenced by the system frequency, so the frequency ranges are not fully linear.
ns
Programming time per 128-byte block
t
PR
CC
22)
2) Programming and erase time depends on the system frequency. Typical values are valid for 40 MHz.
5ms
Erase time per sector
t
ER
CC
2002)
500
ms
Table 16
Flash Access Waitstates
Required Waitstates
Frequency Range for Standard Flash
Speed
0 WS (WSFLASH = 00B)
f
CPU ≤ 16 MHz
1 WS (WSFLASH = 01B)
f
CPU ≤ 28 MHz
2 WS (WSFLASH = 10B)
f
CPU ≤ 40 MHz
相关PDF资料
PDF描述
SAF-XC164N-8F20F 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
SAF-XC164N-16F20F 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
SAF-XC164N-16R20F 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
SAF-XC164SM-16F40F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
SAF-XC164SM-4F40F 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
SAF-XC164D-8F20F 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller with C166SV2 Core
SAF-XC164D-8F20F BB 功能描述:16位微控制器 - MCU 16 BIT FLASH RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
SAF-XC164D-8F40F 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller with C166SV2 Core
SAF-XC164D-8F40F BB 功能描述:16位微控制器 - MCU 16 BIT FLASH RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
SAF-XC164D-8R20F 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller with C166SV2 Core