参数资料
型号: SAK-C164CL-6R16M3V
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 16 MHz, RISC MICROCONTROLLER, PQFP80
封装: 0.65 MM, PLASTIC, MQFP-80
文件页数: 17/75页
文件大小: 1166K
代理商: SAK-C164CL-6R16M3V
C164CI-L16M3V
Low Power
Data Sheet
20
V1.0, 2003-01
Preliminary
The Capture/Compare Unit CAPCOM2
The general purpose CAPCOM2 unit supports generation and control of timing
sequences on up to 8 channels with a maximum resolution of 16 TCL. The CAPCOM
units are typically used to handle high speed I/O tasks such as pulse and waveform
generation, pulse width modulation (PMW), Digital to Analog (D/A) conversion, software
timing, or time recording relative to external events.
Two 16-bit timers (T7/T8) with reload registers provide two independent time bases for
the capture/compare register array.
Each dual purpose capture/compare register, which may be individually allocated to
either CAPCOM timer and programmed for capture or compare function, has one port
pin associated with it which serves as an input pin for triggering the capture function, or
as an output pin to indicate the occurrence of a compare event.
When a capture/compare register has been selected for capture mode, the current
contents of the allocated timer will be latched (‘capture’d) into the capture/compare
register in response to an external event at the port pin which is associated with this
register. In addition, a specific interrupt request for this capture/compare register is
generated. Either a positive, a negative, or both a positive and a negative external signal
transition at the pin can be selected as the triggering event. The contents of all registers
which have been selected for one of the five compare modes are continuously compared
with the contents of the allocated timers. When a match occurs between the timer value
and the value in a capture/compare register, specific actions will be taken based on the
selected compare mode.
Table 5
Compare Modes (CAPCOM2)
Compare Modes
Function
Mode 0
Interrupt-only compare mode;
several compare interrupts per timer period are possible
Mode 1
Pin toggles on each compare match;
several compare events per timer period are possible
Mode 2
Interrupt-only compare mode;
only one compare interrupt per timer period is generated
Mode 3
Pin set ‘1’ on match; pin reset ‘0’ on compare time overflow;
only one compare event per timer period is generated
Double
Register Mode
Two registers operate on one pin; pin toggles on each compare
match;
several compare events per timer period are possible.
Registers CC16 & CC24 pin CC16IO
Registers CC17 & CC25 pin CC17IO
Registers CC18 & CC26 pin CC18IO
Registers CC19 & CC27 pin CC19IO
相关PDF资料
PDF描述
SAK-C164CI-L16M3V 16-BIT, MROM, 16 MHz, RISC MICROCONTROLLER, PQFP80
SAF-C164SL-8R25M 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
SAF-C164SI-8RM 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP80
SAK-C164SI-8RM 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP80
SAF-C164SL-8RM 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
SAK-C164CL-6R25M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SAK-C164CL-6RM 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SAK-C164CL-8R25M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SAK-C164CL-8RM 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SAK-C164CM-4EF 制造商:Infineon Technologies AG 功能描述:16BIT 32K OTP 2K RAM CAN TQFP80