参数资料
型号: SC16C550BIB48,151
厂商: NXP Semiconductors
文件页数: 2/48页
文件大小: 0K
描述: IC UART SINGLE W/FIFO 48-LQFP
产品培训模块: Stand-Alone UARTs
标准包装: 250
特点: 可编程
通道数: 1,UART
FIFO's: 16 字节
电源电压: 2.5V,3.3V,5V
带自动流量控制功能:
带故障启动位检测功能:
带调制解调器控制功能:
带CMOS:
安装类型: 表面贴装
封装/外壳: 48-LQFP
供应商设备封装: 48-LQFP(7x7)
包装: 托盘
产品目录页面: 827 (CN2011-ZH PDF)
其它名称: 568-2040
935274388151
SC16C550BIB48-S
SC16C550B_5
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 05 — 1 October 2008
10 of 48
NXP Semiconductors
SC16C550B
5 V, 3.3 V and 2.5 V UART with 16-byte FIFOs
6.1 Internal registers
The SC16C550B provides 12 internal registers for monitoring and control. These registers
are shown in Table 3. These registers function as data holding registers (THR/RHR),
interrupt status and control registers (IER/ISR), a FIFO Control Register (FCR), line status
and control registers (LCR/LSR), modem status and control registers (MCR/MSR),
programmable data rate (clock) control registers (DLL/DLM), and a user accessible
scratchpad register (SPR). Register functions are more fully described in the following
paragraphs.
[1]
These registers are accessible only when LCR[7] is a logic 0.
[2]
These registers are accessible only when LCR[7] is a logic 1.
6.2 FIFO operation
The 16-byte transmit and receive data FIFOs are enabled by the FIFO Control Register
bit 0 (FCR[0]). With 16C550 devices, the user can set the receive trigger level, but not the
transmit trigger level. The receiver FIFO section includes a time-out function to ensure
data is delivered to the external CPU. An interrupt is generated whenever the Receive
Holding Register (RHR) has not been read following the loading of a character or the
receive trigger level has not been reached.
Table 3.
Internal registers decoding
A2
A1
A0
Read mode
Write mode
General register set (THR/RHR, IER/ISR, MCR/MSR, FCR/LSR, SPR)[1]
0
Receive Holding Register
Transmit Holding Register
0
1
Interrupt Enable Register
0
1
0
Interrupt Status Register
FIFO Control Register
0
1
Line Control Register
1
0
Modem Control Register
1
0
1
Line Status Register
n/a
1
0
Modem Status Register
n/a
1
Scratchpad Register
Baud rate register set (DLL/DLM)[2]
0
LSB of Divisor Latch
0
1
MSB of Divisor Latch
Table 4.
Flow control mechanism
Selected trigger level
(characters)
INT pin activation
Negate RTS
Assert RTS
11
1
0
44
4
0
88
8
0
14
0
相关PDF资料
PDF描述
SC16C550BIB48,128 IC UART SINGLE W/FIFO 48-LQFP
FT232HQ-REEL IC HS USB TO UART/FIFO 48QFN
FT232RQ-REEL IC USB FS SERIAL UART 32-QFN
SC16C550BIA44,512 IC UART SINGLE W/FIFO 44-PLCC
SC16C550BIA44,518 IC UART SINGLE W/FIFO 44-PLCC
相关代理商/技术参数
参数描述
SC16C550BIB48-S 功能描述:UART 接口集成电路 1CH. UART 16B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C550BIBS 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH UART 16B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C550BIBS,128 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C550BIBS,151 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C550BIBS,157 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel