- 您现在的位置：买卖IC网 > PDF目录3764 > SC16C652BIB48,151 (NXP Semiconductors)IC UART DUAL W/FIFO 48-LQFP PDF资料下载
参数资料
| 型号： | SC16C652BIB48,151 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 6/21页 |
| 文件大小： | 0K |
| 描述： | IC UART DUAL W/FIFO 48-LQFP |
| 产品培训模块： | Stand-Alone UARTs |
| 标准包装： | 250 |
| 特点： | 2 通道 |
| 通道数： | 2，DUART |
| FIFO's： | 32 字节 |
| 电源电压： | 2.5V，3.3V，5V |
| 带自动流量控制功能： | 是 |
| 带IrDA 编码器/解码器： | 是 |
| 带故障启动位检测功能： | 是 |
| 带调制解调器控制功能： | 是 |
| 带CMOS： | 是 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-LQFP |
| 供应商设备封装： | 48-LQFP（7x7） |
| 包装： | 托盘 |
| 产品目录页面： | 827 (CN2011-ZH PDF) |
| 其它名称： | 568-3276 935274409151 SC16C652BIB48-S |
SC16C652B_4
Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 04 — 1 September 2005
14 of 43
Philips Semiconductors
SC16C652B
Dual UART with 32-byte FIFOs and IrDA encoder/decoder
6.11 Sleep mode
Sleep mode is an enhanced feature of the SC16C652B UART. It is enabled when EFR[4],
the enhanced functions bit, is set and when IER[4] of both channels are set. Sleep mode
is entered when:
Modem input pins are not toggling.
The serial data input line, RX, is idle (logic HIGH).
The TX FIFO and TX shift register are empty.
There are no interrupts pending.
Remark: Sleep mode will not be entered if there is data in the RX FIFO.
In Sleep mode, the UART clock and baud rate clock are stopped. Since most registers are
clocked using these clocks, the power consumption is greatly reduced.
Remark: Writing to the divisor latches, DLL and DLH, to set the baud clock, must not be
done during Sleep mode. Therefore, it is advisable to disable Sleep mode using IER[4]
before writing to DLL or DLH.
SC16C652B resumes normal operation by any of the following:
Receives a start bit on RXA/RXB pin.
Data is loaded into transmit FIFO.
A change of state on any of the modem input pins
If the device is awakened by one of the conditions described above, it will return to the
Sleep mode automatically after the last character is transmitted or read by the user. The
device will stay in Sleep mode until it is disabled by setting any channel’s IER bit 4 to a
logic 0.
相关PDF资料 |
PDF描述 |
|---|---|
| SC16C652BIB48,128 | IC ENCODER/DECODER IRDA 48LQFP |
| SCC2691AC1N24,602 | IC UART SINGLE 24-DIP |
| SCC2691AE1N24,129 | IC UART 24-DIP |
| SCC2691AE1N24,602 | IC UART SINGLE 24-DIP |
| SC16C2550BIB48,151 | IC UART DUAL W/FIFO 48-LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SC16C652BIB48-F | 功能描述:UART 接口集成电路 16CB 2.5V-5V 2CH UART 32B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| SC16C652BIB48-S | 制造商:NXP Semiconductors 功能描述:UART 2-CH 32Byte FIFO 2.5V/3.3V/5V 48-Pin LQFP Tray |
| SC16C652BIBS | 功能描述:UART 接口集成电路 16CB 2.5V-5V 2CH UART 32B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| SC16C652BIBS,128 | 功能描述:UART 接口集成电路 16CB 2.5V-5V 2CH RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| SC16C652BIBS,151 | 功能描述:UART 接口集成电路 16CB 2.5V-5V 2CH RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。