- 您现在的位置：买卖IC网 > PDF目录11825 > SC16C750BIA44,518 (NXP Semiconductors)IC UART SINGLE W/FIFO 44-PLCC PDF资料下载
参数资料
| 型号： | SC16C750BIA44,518 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 43/44页 |
| 文件大小： | 0K |
| 描述： | IC UART SINGLE W/FIFO 44-PLCC |
| 产品培训模块： | Stand-Alone UARTs |
| 标准包装： | 1 |
| 通道数： | 1，UART |
| FIFO's： | 64 字节 |
| 电源电压： | 2.5V，3.3V，5V |
| 带自动流量控制功能： | 是 |
| 带故障启动位检测功能： | 是 |
| 带调制解调器控制功能： | 是 |
| 带CMOS： | 是 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 44-LCC（J 形引线） |
| 供应商设备封装： | 44-PLCC |
| 包装： | 标准包装 |
| 产品目录页面： | 828 (CN2011-ZH PDF) |
| 其它名称： | 568-2049-6 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页当前第43页第44页
SC16C750B_5
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 05 — 17 October 2008
8 of 44
NXP Semiconductors
SC16C750B
5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
[1]
In Sleep mode, XTAL2 is left oating.
6.
Functional description
The SC16C750B provides serial asynchronous receive data synchronization,
parallel-to-serial and serial-to-parallel data conversions for both the transmitter and
receiver sections. These functions are necessary for converting the serial data stream into
parallel data that is required with digital data systems. Synchronization for the serial data
stream is accomplished by adding start and stop bits to the transmit data to form a data
character (character orientated protocol). Data integrity is insured by attaching a parity bit
to the data character. The parity bit is checked by the receiver for any transmission bit
errors. The SC16C750B is fabricated with an advanced CMOS process to achieve low
drain power and high speed requirements.
The SC16C750B is an upward solution that provides 64 bytes of transmit and receive
FIFO memory, instead of none in the 16C450, or 16 bytes in the 16C550. The
SC16C750B is designed to work with high speed modems and shared network
environments that require fast data processing time. Increased performance is realized in
the SC16C750B by the larger transmit and receive FIFOs. This allows the external
processor to handle more networking tasks within a given time. In addition, the four
selectable levels of FIFO trigger interrupt and automatic hardware ow control is uniquely
provided for maximum data throughput performance, especially when operating in a
multi-channel environment. The combination of the above greatly reduces the bandwidth
requirement of the external controlling CPU, increases performance, and reduces power
consumption.
The SC16C750B is capable of operation up to 3 Mbit/s with a 48 MHz external clock input
(at 5 V).
TXRDY27
13
15
O
Transmitter ready. Transmitter DMA signaling is available with
TXRDY. When operating in the FIFO mode, one of two types of
DMA signaling can be selected using FCR[3]. When operating in
the 16C450 mode, only DMA mode 0 is allowed. Mode 0 supports
single-transfer DMA in which a transfer is made between CPU bus
cycles. Mode 1 supports multi-transfer DMA in which multiple
transfers are made continuously until the transmit FIFO has been
lled.
VCC
44
40
27
Power 2.5 V, 3 V or 5 V supply voltage.
GND
22
8
13
Power Ground voltage.
IOW
21
6
-
I
Write inputs. When either IOW or IOW is active (LOW or HIGH,
respectively) and while the UART is selected, the CPU is allowed to
write control words or data into a selected UART register. Only one
of these inputs is required to transfer data during a write operation;
the other input should be tied to its inactive level (that is, IOW tied
LOW or IOW tied HIGH).
IOW
20
4
11
I
XTAL1
18
1
9
I
Crystal connection or External clock input.
XTAL2[1]
19
2
10
O
Crystal connection or the inversion of XTAL1 if XTAL1 is
driven.
Table 2.
Pin description …continued
Symbol
Pin
Type
Description
PLCC44 LQFP64
HVQFN32
相关PDF资料 |
PDF描述 |
|---|---|
| SCC2691AC1A28,602 | IC UART SINGLE 28-PLCC |
| SC16IS762IPW-T | IC UART DUAL I2C/SPI 28-TSSOP |
| SC16C2550BIA44,529 | IC UART DUAL W/FIFO 44-PLCC |
| SC16C2550BIA44,512 | IC UART DUAL W/FIFO 44-PLCC |
| SC16C2550BIA44,518 | IC UART DUAL W/FIFO 44-PLCC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SC16C750BIA44-S | 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| SC16C750BIA44-T | 功能描述:UART 接口集成电路 1CH. UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| SC16C750BIB64 | 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| SC16C750BIB64,128 | 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| SC16C750BIB64,151 | 功能描述:UART 接口集成电路 16CB 2.5V-5V 1CH RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。