参数资料
型号: SC28L91A1A,512
厂商: NXP Semiconductors
文件页数: 18/30页
文件大小: 0K
描述: IC UART SINGLE W/FIFO 44-PLCC
标准包装: 26
系列: IMPACT
特点: 故障启动位检测
通道数: 1,UART
FIFO's: 16 字节
电源电压: 3.3V,5V
带自动流量控制功能:
带故障启动位检测功能:
带调制解调器控制功能:
带CMOS:
安装类型: 表面贴装
封装/外壳: 44-LCC(J 形引线)
供应商设备封装: 44-PLCC
包装: 管件
其它名称: 935267418512
SC28L91A1A
SC28L91A1A-ND
25
2552KS–AVR–04/11
ATmega329/3290/649/6490
10.2
ATmega3290
10.2.1
ATmega3290 rev. C
Interrupts may be lost when writing the timer registers in the asynchronous timer
1.
Interrupts may be lost when writing the timer registers in the asynchronous timer
The interrupt will be lost if a timer register that is synchronous timer clock is written when the
asynchronous Timer/Counter register (TCNTx) is 0x00.
Problem Fix/Wortkaround
Always check that the asynchronous Timer/Counter register neither have the value 0xFF nor
0x00 before writing to the asynchronous Timer Control Register (TCCRx), asynchronous
Timer Counter Register (TCNTx), or asynchronous Output Compare Register (OCRx).
10.2.2
ATmega3290 rev. B
Not sampled.
10.2.3
ATmega3290 rev. A
LCD contrast voltage too high
Interrupts may be lost when writing the timer registers in the asynchronous timer
1.
LCD contrast voltage too high
When the LCD is active and using low power waveform, the LCD contrast voltage can be too
high. This occurs when V
CC is higher than VLCD, and when using low LCD drivetime.
Problem Fix/Workaround
There are several possible workarounds:
- Use normal waveform instead of low power waveform
- Use drivetime of 375 s or longer
2.
Interrupts may be lost when writing the timer registers in the asynchronous timer
The interrupt will be lost if a timer register that is synchronous timer clock is written when the
asynchronous Timer/Counter register (TCNTx) is 0x00.
Problem Fix/Wortkaround
Always check that the asynchronous Timer/Counter register neither have the value 0xFF nor
0x00 before writing to the asynchronous Timer Control Register (TCCRx), asynchronous
Timer Counter Register (TCNTx), or asynchronous Output Compare Register (OCRx).
相关PDF资料
PDF描述
VI-26B-IY CONVERTER MOD DC/DC 95V 50W
D38999/20JB98HN CONN RCPT 6POS WALL MNT W/PINS
VE-BT2-IX-F3 CONVERTER MOD DC/DC 15V 75W
SC26C92C1B,528 IC UART DUAL W/FIFO 44PQFP
VI-24Z-IX CONVERTER MOD DC/DC 2V 30W
相关代理商/技术参数
参数描述
SC28L91A1A-S 功能描述:UART 接口集成电路 3V-5V 1CH UART INTEL/MOT INTRF RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC28L91A1A-T 功能描述:UART 接口集成电路 3V-5V 1CH UART INTEL/MOT INTRF RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC28L91A1B 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:3.3V-5.0V Universal Asynchronous Receiver/Transmitter (UART)
SC28L91A1B,528 功能描述:UART 接口集成电路 3V-5V 1CH UART RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC28L91A1B,551 功能描述:UART 接口集成电路 UART SINGLE W/FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel