参数资料
型号: SC402BMLTRT
厂商: Semtech
文件页数: 29/32页
文件大小: 1425K
描述: IC REG DL BCK/LINEAR SYNC 32MLPQ
标准包装: 1
系列: EcoSpeed®, SmartDrive™
拓扑: 降压(降压)同步(1),线性(LDO)(1)
功能: 任何功能
输出数: 2
频率 - 开关: 1MHz
电压/电流 - 输出 1: 可调至 0.6V,10A
电压/电流 - 输出 2: 可调至 0.75V,200mA
带 LED 驱动器:
带监控器:
带序列发生器:
电源电压: 3 V ~ 28 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 32-VFQFN 裸露焊盘
供应商设备封装: 32-MLPQ(5x5)
包装: 标准包装
其它名称: SC402BMLDKR
SC402B
29
AGND Island
AGND should have its own island of copper with
no other signal traces routed on this layer that
connects the AGND pins and pad of the IC to the
analog control components.
All of the components for the analog control cir-
cuitry should be located so that the connections
to AGND are done by wide copper traces or vias
down to AGND.
Connect PGND to AGND with a short trace or 0&
resistor. This connection should be as close to
the IC as possible.
FB, VOUT, and Other Analog Control Signals
The connection from the V
OUT
 power to the
analog control circuitry must be routed from the
output capacitors and located on a quiet layer.
The traces between Vout and the analog control
circuitry (VOUT, and FB pins) must be wide, short
and routed away from noise sources, such as
BST, LX, VIN, and PGND between the input
capacitors, output capacitors, and the IC.
The feedback components for the switcher and
the LDO need to be as close to the FB and FBL
pins of the IC as possible to reduce the possibil-
ity of noise corrupting these analog signals.
BST, ILIM,TON,SS and LX
The connections for the boost capacitor
between the BST and LXBST must be short, wide
and directly connected.
ILIM and TON nodes must be as short as possible
to ensure the best accuracy in current limit and
on time.
R
ILIM
 should be close to the IC and connected
between LXS (pin 28) and ILIM (pin 27) only.
R
TON
 should be close to the IC and connected
between TON (pin 31) and AGND (pin 30).
C
SOFT
 should be close to the IC and kept away
from the boost capacitor. Connect the AGND
end of C
SOFT
 to the AGND plane at pin 4.
The LX node between the IC and the inductor
should be wide enough to handle the inductor
current and short enough to eliminate the pos-
sibility of LX noise corrupting other signals.
"
"
"
"
"
"
"
"
"
"
"
"
Multiple vias should be used on the LX PAD to
provide good thermals and connection to an
internal or bottom layer LX plane.
Capacitors and Current Loops
Figure 17 shows the placement of input/output
capacitors and inductor. This placement shows
the smallest current loops between the input/
output capacitors, the SC402B and the inductor
to reduce the IR drop across the copper.
"
"
Applications Information (continued)
相关PDF资料
PDF描述
SC403MLTRT IC REG DL BCK/LINEAR SYNC 32MLPQ
SC418ULTRT IC REG DL BUCK/LINEAR 20MLPQ
SC424MLTRT IC REG DL BUCK/LINEAR 28MLPQ
SC4250LISTRT IC HOT SWAP CTRLR 8-SOIC
SC427MLTRT IC REG DL BUCK/LINEAR 32MLPQ
相关代理商/技术参数
参数描述
SC402S 功能描述:数据转换模块 SC400 4W SERIAL OEM RoHS:否 制造商:Lyrtech 产品:ADC and DAC FMC Modules 转换速率:250 MSPS, 1 GSPS 信噪比: ADC 输入端数量:2 DAC 输出端数量:2 分辨率:14 bit, 16 bit 接口类型:SPI 工作电源电压:3.3 V, 12 V 工作电源电流: 最大工作温度: 尺寸:84 mm x 69 mm x 10 mm
SC403 制造商:SEMTECH 制造商全称:Semtech Corporation 功能描述:6A EcoSpeedTM Integrated FET Regulator with Programmable LDO
SC403B 制造商:SEMTECH 制造商全称:Semtech Corporation 功能描述:6A EcoSpeed?? Integrated FET Regulator with Programmable LDO
SC403BEVB 制造商:SEMTECH 功能描述:Evaluation Board for 10 A EcoSpeed?Integrated FET Regulator w/ Programmable LDO
SC403BMLTRT 制造商:Semtech Corporation 功能描述:Integrated FET Regulator with Programmable LDO 32-Pin MLPQ T/R 制造商:Semtech Corporation 功能描述:6A EcoSpeed Integrated FET Regulator with Programmable LDO. PKG: MLPQ-32 制造商:Semtech 功能描述:Integrated FET Regulator with Programmable LDO 32-Pin MLPQ T/R 制造商:SEMTECH 功能描述:6A EcoSpeed step down regultor