- 您现在的位置：买卖IC网 > Datasheet目录1008 > SCP1000-D01 DEMO (Murata Electronics Oy)SCP1000 DEMO KIT Datasheet资料下载
参数资料
| 型号： | SCP1000-D01 DEMO |
| 厂商： | Murata Electronics Oy |
| 文件页数： | 3/7页 |
| 文件大小： | 0K |
| 描述： | SCP1000 DEMO KIT |
| 标准包装： | 1 |
| 传感器类型： | 压力 |
| 传感范围： | 30 ~ 120 kPa |
| 接口： | SPI |
| 灵敏度： | 1.5 Pa |
| 电源电压： | 2.4 V ~ 3.3 V |
| 嵌入式： | 否 |
| 已供物品： | 2 个板，线缆，CD |
| 已用 IC / 零件： | SCP1000-D01 |
| 相关产品： | 551-1046-6-ND - SENSOR 30-120KPA SPI 551-1046-1-ND - SENSOR 30-120KPA SPI 551-1046-2-ND - SENSOR 30-120KPA SPI |
| 其它名称： | 551-1045 SCP1000 DEMO |
SCP1000 Series
Interface Options
Communication interface is pre-programmed in the factory and it can be either SPI (Serial Peripheral
Interface) or I 2 C (Inter-Integrated Circuit). The SPI interface is a full duplex 4 wire interface and the
connection between the MCU and SCP1000 is achieved using MOSI, MISO, SCK and CSB. The I 2 C
interface is slave-only half duplex two-wire interface available on SDA and SCL pins.
Interface Options
The SCP1000 Pressure sensor has 4 normal operation modes plus power down mode.
Mode
High resolution
High speed
Ultra low power
Low power
Power Down
Pressure measurement
Continues
Continues
Periodical
External trigger
Activated through PD pin
Resolution
17 bits
15 bits
15 bits
17 bits or 15 bits
Output data refresh rate
1.8 Hz
9 Hz
Approximately 1 Hz
Electrical Connections
The SCP1000 pressure sensor supports two communication interfaces, SPI and I 2 C. Appropriate
communication interface is pre-programmed in the factory.
SCP1000- D01 (SPI Interface)
Pin #
1
2
Name
ATST
TRIG (6
Function
Connect to analog ground
Trigger input, connect to GND if
Characteristics
For factory use only
Digital input
not used
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DRDY
CLK
DVDD
DVSS
DVDDS
PD (6
SCK (6
MOSI (6
MISO
CSB (6
AVDD
AVSS
AVSS
ATST
Interrupt signal (data ready)
Connect to digital GND
Digital supply voltage
Digital ground
Digital supply filter
Power down, connect to GND if
not used
SPI clock input
SPI data input
SPI data output
SPI chip select
Analog supply voltage
Analog ground
Analog ground
Connect to analog ground
Digital output
Power line
Power line
Digital power supply filter
Input to force the chip in power down
mode
Interface clock
Digital data input
Digital data output
Digital input
Power line
Power line
Power line
For factory use only
Note 6 The MCU has to actively drive the signal in high and low states
VTI Technologies Oy
www.vti.fi
Subject to changes
3/7
相关PDF资料 |
PDF描述 |
|---|---|
| SCPE-G-5.00-S | CBL ASSY ETHERNET SEALED SGL 5M |
| SCR027019 | FAN HEATER 650W 12A 120V |
| SCW-SC3LF-250R-F | RES 250 OHM 3W 1% 2512 WIDE |
| SD1A24D | RELAY REED SPST 1A 24V |
| SDA412 | PLUG PRESSURE COMPENSATION |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SCP1000-D11 | 功能描述:SENSOR I2C 30-120KPA RoHS:是 类别:传感器，转换器 >> 压力 系列:SCP1000 标准包装:100 系列:* |
| SCP100S24X-CM | 功能描述:DIN导轨式电源 100W 24V 3.8A IP67 Rated RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压（通道 1）:48 V 输出电流（通道 1）: 输出电压（通道 2）: 输出电流（通道 2）: 输出电压（通道 3）: 输出电流（通道 3）: 尺寸:150 mm L x 110 mm W |
| SCP100S24X-CP | 功能描述:DIN导轨式电源 95W 24VDC 3.8A Control Power Apps RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压（通道 1）:48 V 输出电流（通道 1）: 输出电压（通道 2）: 输出电流（通道 2）: 输出电压（通道 3）: 输出电流（通道 3）: 尺寸:150 mm L x 110 mm W |
| SCP100S24X-DVN | 功能描述:DIN导轨式电源 95W 24VDC 3.8A DeviceNet Apps RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压（通道 1）:48 V 输出电流（通道 1）: 输出电压（通道 2）: 输出电流（通道 2）: 输出电压（通道 3）: 输出电流（通道 3）: 尺寸:150 mm L x 110 mm W |
| SCP107M2-A0-20C | 制造商:TOKO 制造商全称:TOKO, Inc 功能描述:Radial Taping / FM Ceramic Filters |
发布紧急采购，3分钟左右您将得到回复。