- 您现在的位置：买卖IC网 > PDF目录19008 > SCP1000-D01 (Murata Electronics Oy)SENSOR 30-120KPA SPI PDF资料下载
参数资料
| 型号： | SCP1000-D01 |
| 厂商： | Murata Electronics Oy |
| 文件页数： | 3/7页 |
| 文件大小： | 0K |
| 描述： | SENSOR 30-120KPA SPI |
| 产品目录绘图： | SCP1000 Series Bottom SCP1000 Series Side |
| 标准包装： | 0 |
| 系列： | SCP1000 |
| 压力类型： | 绝对 |
| 工作压力： | 4.35 ~ 17.40 PSI，30 ~ 120 kPa |
| 输出： | 数字 |
| 电源电压： | 2.4 V ~ 3.3 V |
| 端接类型： | 表面贴装型 |
| 工作温度： | -20°C ~ 70°C |
| 封装/外壳： | PCB 安装 |
| 配用： | 551-1045-ND - SCP1000 DEMO KIT |
| 其它名称： | 551-1046-6 |
SCP1000 Series
Interface Options
Communication interface is pre-programmed in the factory and it can be either SPI (Serial Peripheral
Interface) or I 2 C (Inter-Integrated Circuit). The SPI interface is a full duplex 4 wire interface and the
connection between the MCU and SCP1000 is achieved using MOSI, MISO, SCK and CSB. The I 2 C
interface is slave-only half duplex two-wire interface available on SDA and SCL pins.
Interface Options
The SCP1000 Pressure sensor has 4 normal operation modes plus power down mode.
Mode
High resolution
High speed
Ultra low power
Low power
Power Down
Pressure measurement
Continues
Continues
Periodical
External trigger
Activated through PD pin
Resolution
17 bits
15 bits
15 bits
17 bits or 15 bits
Output data refresh rate
1.8 Hz
9 Hz
Approximately 1 Hz
Electrical Connections
The SCP1000 pressure sensor supports two communication interfaces, SPI and I 2 C. Appropriate
communication interface is pre-programmed in the factory.
SCP1000- D01 (SPI Interface)
Pin #
1
2
Name
ATST
TRIG (6
Function
Connect to analog ground
Trigger input, connect to GND if
Characteristics
For factory use only
Digital input
not used
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DRDY
CLK
DVDD
DVSS
DVDDS
PD (6
SCK (6
MOSI (6
MISO
CSB (6
AVDD
AVSS
AVSS
ATST
Interrupt signal (data ready)
Connect to digital GND
Digital supply voltage
Digital ground
Digital supply filter
Power down, connect to GND if
not used
SPI clock input
SPI data input
SPI data output
SPI chip select
Analog supply voltage
Analog ground
Analog ground
Connect to analog ground
Digital output
Power line
Power line
Digital power supply filter
Input to force the chip in power down
mode
Interface clock
Digital data input
Digital data output
Digital input
Power line
Power line
Power line
For factory use only
Note 6 The MCU has to actively drive the signal in high and low states
VTI Technologies Oy
www.vti.fi
Subject to changes
3/7
相关PDF资料 |
PDF描述 |
|---|---|
| SCP1000 PCB3 | SENSOR I2C 30-120KPA PCB |
| SCP1000 PCB1 | SENSOR SPI 30-120KPA PCB |
| TXN310110100000 | TXRX OPT SFF 2/1GBPS 850NM MULTI |
| QEE123 | LED IR EMITTING 880NM SIDELOOKER |
| D2VW-01-1MS | SWITCH BASIC SPDT .1A W/WIRES |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SCP1000-D01 DEMO | 功能描述:SCP1000 DEMO KIT RoHS:是 类别:编程器，开发系统 >> 评估板 - 传感器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- |
| SCP1000-D11 | 功能描述:SENSOR I2C 30-120KPA RoHS:是 类别:传感器，转换器 >> 压力 系列:SCP1000 标准包装:100 系列:* |
| SCP100S24X-CM | 功能描述:DIN导轨式电源 100W 24V 3.8A IP67 Rated RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压（通道 1）:48 V 输出电流（通道 1）: 输出电压（通道 2）: 输出电流（通道 2）: 输出电压（通道 3）: 输出电流（通道 3）: 尺寸:150 mm L x 110 mm W |
| SCP100S24X-CP | 功能描述:DIN导轨式电源 95W 24VDC 3.8A Control Power Apps RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压（通道 1）:48 V 输出电流（通道 1）: 输出电压（通道 2）: 输出电流（通道 2）: 输出电压（通道 3）: 输出电流（通道 3）: 尺寸:150 mm L x 110 mm W |
| SCP100S24X-DVN | 功能描述:DIN导轨式电源 95W 24VDC 3.8A DeviceNet Apps RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压（通道 1）:48 V 输出电流（通道 1）: 输出电压（通道 2）: 输出电流（通道 2）: 输出电压（通道 3）: 输出电流（通道 3）: 尺寸:150 mm L x 110 mm W |
发布紧急采购，3分钟左右您将得到回复。