- 您现在的位置：买卖IC网 > PDF目录192321 > SD-14531F2-802 (DATA DEVICE CORP) SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36 PDF资料下载
参数资料
| 型号： | SD-14531F2-802 |
| 厂商： | DATA DEVICE CORP |
| 元件分类： | 位置变换器 |
| 英文描述： | SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36 |
| 封装： | CERAMIC, FP-36 |
| 文件页数： | 12/16页 |
| 文件大小： | 170K |
| 代理商： | SD-14531F2-802 |
5
Data Device Corporation
www.ddc-web.com
SD-14531
and reset after the converter settles out. BIT will also change to logic
1 for an over-velocity condition, because the converter loop cannot
maintain input-output and/or if the converter malfunctions where it
cannot maintain the loop at a null. BIT will also be set for a Loss-of-
Signal (LOS) and/or a Loss-of-Reference (LOR).
PROGRAMMABLE RESOLUTION (14B, PIN 16)
Resolution is controlled by one logic input,14B. The resolution
can be changed during converter operation so the appropriate
resolution and velocity dynamics can be changed as needed. To
insure that a race condition does not exist between counting and
changing the resolution, input 14B is latched internally on the
trailing edge of CB (see FIGURE 2).
INTERFACING - INPUTS
SIGNAL INPUT OPTIONS
The SD-14531 series offers programmable synchro or resolver
inputs. In a synchro or resolver, shaft angle data is transmitted as
the ratio of carrier amplitudes across the input terminals.
Synchro signals, which are of the form sin
θcosωt, sin(θ+120°)
(e) in the converter. A digital position error will result due to the
interaction of this quadrature voltage and a reference phase shift
between the converter signal and reference inputs. The magni-
tude of this error is given by the following formula:
Magnitude of Error=(Quadrature Voltage/F.S.signal) tan(
α)
Where:
Magnitude of Error is in radians,
Quadrature Voltage is in volts,
Full Scale signal is in volts,
α = signal-to-REF phase shift.
An example of the magnitude of error is as follows:
Let:
Quadrature Voltage = 11.8 mV
Let:
F.S. signal = 11.8 V
Let:
α = 6°
Then: Magnitude of Error = 0.35 min
1 LSB in the 16th bit.
Note: Quadrature is composed of static quadrature which is
specified by the synchro or resolver supplier plus the speed volt-
age which is determined by the following formula:
Speed Voltage=(rotational speed/carrier frequency) F.S. signal
Where:
Speed Voltage is the quadrature due to rotation,
Rotational speed is the rps (rotations per second) of the
synchro or resolver,
Carrier frequency is the REF in Hz.
BUILT-IN-TEST (BIT, PIN 15)
The Built-In-Test output (BIT) monitors the level of error (D) from the
demodulator. D represents the difference in the input and output
angles and ideally should be zero; if it exceeds approximately 180
LSBs (of the selected resolution) the logic level at BIT will change
from a logic 0 to logic 1. This condition will occur during a large step
;;;
;;
14B
0
s MIN
CB
0.1
s MIN
30
90
150
210
270
330
360
θ
(DEGREES)
CCW
In
Phase
with
RL-RH
of
Converter
and
R2-R1
of
CX.
0
S1-S3 = V
SIN
θ
MAX
S3-S2 = V
SIN(
θ + 120°)
MAX
S2-S1 = V
SIN(
θ + 240°)
MAX
- V
MAX
+ V
MAX
30
90
150
210
270
330
360
θ
(DEGREES)
CW
In
Phase
with
RH-RL
of
Converter
and
R2-R4
of
RX.
0
S2-S4 = V
COS
θ
MAX
S3-S1 = V
SIN(
θ)
MAX
- V
MAX
+ V
MAX
FIGURE 2. RESOLUTION CONTROL TIMING DIAGRAM
Standard Resolver Control Transmitter (RX) Outputs as a Function of CW Rotation
From Electrical Zero (EZ) With R2-R4 Excited.
Standard Synchro Control Transmitter (CX) Outputs as a Function of CCW Rotation
From Electrical Zero (EZ).
FIGURE 3. SYNCHRO AND RESOLVER SIGNALS
相关PDF资料 |
PDF描述 |
|---|---|
| SD-14531F4-802 | SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36 |
| SD-14531F4-805 | SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36 |
| SD-14531F5-302 | SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36 |
| SD-14531F5-304 | SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36 |
| SD-14531F5-305 | SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SD1455 | 功能描述:射频双极电源晶体管 NPN 25V 170-230MHz RoHS:否 制造商:M/A-COM Technology Solutions 配置:Single 直流集电极/Base Gain hfe Min:40 最大工作频率:30 MHz 集电极—发射极最大电压 VCEO:25 V 发射极 - 基极电压 VEBO:4 V 集电极连续电流:20 A 最大直流电集电极电流: 功率耗散:250 W 封装 / 箱体:Case 211-11 封装:Tray |
| SD1456 | 功能描述:射频双极电源晶体管 NPN 28V 170-230MHz RoHS:否 制造商:M/A-COM Technology Solutions 配置:Single 直流集电极/Base Gain hfe Min:40 最大工作频率:30 MHz 集电极—发射极最大电压 VCEO:25 V 发射极 - 基极电压 VEBO:4 V 集电极连续电流:20 A 最大直流电集电极电流: 功率耗散:250 W 封装 / 箱体:Case 211-11 封装:Tray |
| SD1457 | 功能描述:射频放大器 RF Bipolar Trans RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| SD1458 | 功能描述:射频放大器 RF Bipolar Trans RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| SD1459 | 功能描述:射频双极电源晶体管 NPN 28V 170-230MHz RoHS:否 制造商:M/A-COM Technology Solutions 配置:Single 直流集电极/Base Gain hfe Min:40 最大工作频率:30 MHz 集电极—发射极最大电压 VCEO:25 V 发射极 - 基极电压 VEBO:4 V 集电极连续电流:20 A 最大直流电集电极电流: 功率耗散:250 W 封装 / 箱体:Case 211-11 封装:Tray |
发布紧急采购，3分钟左右您将得到回复。