23
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
SD
SERIES
D-Sub
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY
REMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
PLATING:
STANDARD FINISH: Gold flash over nickel plate.
OPTIONAL FINISHES: 0.000030 [0.76 ] gold over nickel by adding “-14” suffix onto part number. Example: FC7520D-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MC7526D-15
C
B
A
0.040
[1.02]
B
C
0.170
[4.32]
A
0.170
[4.32]
CLOSED CRIMP BARREL
FEMALE CONTACT
MALE CONTACT
PART NUMBER
WIRE SIZE
AWG/[mm2]
AB
C
FC7520D
20 / 22 / 24
[0.5/0.3/0.25]
0.612
[15.54]
0.045
[1.14]
0.066
[1.68]
FC7526D
26 / 28 / 30
[0.12/0.08/0.05]
0.612
[15.54]
0.026
[0.66]
0.066
[1.68]
PART NUMBER
WIRE SIZE
AWG/[mm2]
AB
C
MC7520D
20 / 22 / 24
[0.5/0.3/0.25]
0.618
[15.70]
0.045
[1.14]
0.066
[1.68]
MC7526D
26 / 28 / 30
[0.12/0.08/0.05]
0.618
[15.70]
0.026
[0.66]
0.066
[1.68]
Note: *C75**D contacts can not be used in the RD series.
REMOVABLE CRIMP CONTACTS
CODE 1 AND 12
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
0.927 [23.55]
0.086
[2.18]
0.915 [23.25]
0.170
[4.32]
0.055
[1.40]
0.170
[4.32]
0.040
[1.02]
0.086
[2.18]
0.055
[1.40]
FEMALE CONTACT
MALE CONTACT
MC7518D
FC7518D
PLATING:
STANDARD FINISH: Gold flash over nickel plate.
OPTIONAL FINISHES: 0.000030 [0.76 ] gold over nickel by adding “-14” suffix onto part number. Example: FC7518D-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MC7518D-15
For information regarding crimp tool and crimping tool techniques, see Application Tools section, pages 78-83.
The crimp area of this contact is not
protected when fully seated in the
connector molding. These contacts
require shrink tubing after installation.
Not suitable for fully loaded connector.
REMOVABLE CRIMP CONTACTS
18 AWG CRIMP CONTACTS
18 AWG [1.0mm2]
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.