- 您现在的位置：买卖IC网 > PDF目录16658 > SFR-1/2-0-SP (TE Connectivity)HEAT SHRINK TUBING PDF资料下载
参数资料
| 型号： | SFR-1/2-0-SP |
| 厂商： | TE Connectivity |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | HEAT SHRINK TUBING |
| 标准包装： | 300 |
| 系列： | SFR |
| 类型： | 套管，弹性 |
| 收缩比率： | 1.75 至 1 |
| 内径 - 提供： | 0.500"（12.7mm） |
| 内径 - 恢复： | 0.286"（7.3mm） |
| 已恢复的墙壁厚度： | 0.048"（1.21mm） |
| 材质： | 硅树脂人造橡胶 |
| 特点： | 阻燃 |
| 颜色： | 黑 |
| 其它名称： | 5660034001 |
SPECIFICATION RT-1140 ISSUE 5
Page 3
4.3.1
Dimensions and Longitudinal Change
Measure three 6-inch (150 mm) specimens of tubing, as supplied, for length ± 1/32 inch (± 1 mm) , and inside
diameter in accordance with ASTM D 2671. Condition the specimens for 10 minutes in a 175 ± 5°C (347 ±
9°F) oven, cool to 23 ± 3°C (73 ± 5°F) and remeasure. Prior to and after conditioning, the dimensions of the
tubing shall be in accordance with Table 1 and the longitudinal change shall be in accordance with Table 3.
Calculate the longitudinal change as follows:
C =
L1 - L0
L0
x 100
0
1
Where:
C
L
L
= Longitudinal Change [Percent]
= Length Before Conditioning [Inches (mm) ]
= Length After Conditioning [Inches (mm) ]
4.3.2
4.4
5.
5.1
5.2
Tensile Strength, Tensile Stress and Ultimate Elongation
Test three specimens of tubing for tensile strength and ultimate elongation in accordance with ASTM D
2671, and for tensile stress in accordance with ASTM D 412. For tubing sizes 3/8 and smaller, the specimens
shall be full sections of tubing; for sizes 1/2 and larger, the specimens shall be cut with die C of ASTM D
412. The specimens shall have 1-inch (25-mm) bench marks, centrally located. The testing machine shall
have an initial jaw separation of 1 inch (25 mm) for full sections of tubing and 2 inches (50 mm) for die-cut
specimens. The rate of jaw separation shall be 20 ± 2 inches (500 ± 5 mm) per minute.
REJECTION AND RETEST
Failure of any sample of tubing to comply with any one of the requirements of this specification shall be
cause for rejection of the lot represented. Tubing which has been rejected may be replaced or reworked to
correct the defect and then resubmitted for acceptance. Before resubmitting, full particulars concerning the
rejection and the action taken to correct the defect shall be furnished to the inspector.
PREPARATION FOR DELIVERY
PACKAGING
Packaging shall be in accordance with good commercial practice. The shipping container shall be not less
than 125-pound-test fiberboard.
MARKING
Each container of tubing shall be permanently and legibly marked with the size, quantity, manufacturer's
name, part number, specification number, lot number, date of manufacture and expiration date.
If this document is printed it becomes uncontrolled. Check for the latest revision.
相关PDF资料 |
PDF描述 |
|---|---|
| RP-4800-NO.6-0-STK | HEAT SHRINK TUBING |
| RT555-1/2-0-SP | HEAT SHRINK TUBING |
| CB5045-000 | HEAT SHRINK TUBING |
| A8MMS-1036G | ADM10S/AE10G/ADM10S |
| EBM31DCTI-S288 | CONN EDGECARD 62POS .156 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SFR12R-1/5STE1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:0.8nn FLEX CIRCUIT/FLAT CABLE/CIC SURFLOK SFR SERIES |
| SFR12R-1STAE1LF | 制造商:FCI 功能描述:Conn FPC Connector SKT 12 POS 0.8mm Solder RA SMD Embossed T/R |
| SFR12R-1STE1 | 功能描述:SFR12R-1STE1-SFR12R-1STE1 RoHS:否 类别:连接器，互连式 >> FFC，FPC（扁平软线）- 连接器 - 面板安装 系列:SFR 标准包装:1 系列:Easy-On™ 54809 连接器类型:底部触点 位置数:31 间距:0.012"（0.30mm） FFC，FCB 厚度:0.20mm 板上方高度:0.051"（1.30mm） 安装类型:表面贴装，直角 线缆端类型:直形 端子:焊接 锁定功能:触发锁 特点:零插入力（ZIF） 包装:Digi-Reel® 触点表面涂层:锡铋 触点涂层厚度:- 工作温度:-20°C ~ 85°C 额定电流:0.300A 额定电压:50V 体座材料:液晶聚合物（LCP） 其它名称:WM6540DKR |
| SFR12R-1STE1LF | 功能描述:FFC & FPC连接器 12P SMT/ZIF RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| SFR12R-1STE3 | 制造商:FCI 功能描述:538-58BF-FLEX 0.8 SFR-R |
发布紧急采购，3分钟左右您将得到回复。