收藏本站
参数资料
型号： SFSA16GBQ1BR8TO-I-DT-226-STD
厂商： Swissbit NA Inc
文件页数： 12/47页
文件大小： 0K
描述： FLASH SLC UDMA/MDMA/PIO 16GB
标准包装： 20
系列： x-200
存储容量： 16GB
存储器类型： 闪存 - NAND
其它名称： 1052-1071
6.1 Check Power Mode (98h or E5h)
This command checks the power mode.
Issuing the command while the Drive is in Standby mode, is about to enter Standby, or is exiting Standby, the
command will set BSY, set the Sector Count Register to 00h, clear BSY and generate an interrupt.
Issuing the command when the Drive is in Idle mode will set BSY, set the Sector Count Register to FFh, clear BSY
and generate an interrupt.
Table 15 defines the Byte sequence of the Check Power Mode command.
Table 15: Check Power Mode
Task File Register
7
6
5
4
3
2
1
0
COMMAND
98h or E5h
DRIVE/HEAD
nu
nu
nu
D
nu
CYLINDER HI
CYLINDER LOW
SECTOR NUM
SECTOR COUNT
FEATURES
nu
nu
nu
nu
nu
6.2 Erase Sector(s) (C0h)
This command is used to pre-erase and condition data sectors prior to a Write Sector without Erase command or
a Write Multiple Without Erase command. There is no data transfer associated with this command but a Write
Fault error status can occur. Table 16 defines the Byte sequence of the Erase Sector command.
Table 16: Erase Sector(s)
Task File Register
7
6
5
4
3
2
1
0
COMMAND
C0h
DRIVE/HEAD
nu
L
nu
D
H[3:0] or LBA[27:24] of the starting sector/LBA
CYLINDER HI
CYLINDER LOW
SECTOR NUM
SECTOR COUNT
FEATURES
Cylinder[15:8] or LBA[23:16] of the first sector/LBA to erase
Cylinder[7:0] or LBA[15:8] of the first sector/LBA to erase
Sector[7:0] or LBA[7:0] of the first sector/LBA to erase
The number of sectors/logical blocks to erase
nu
6.3 Execute Drive Diagnostic (90h)
This command performs the internal diagnostic tests implemented by the Drive.
The Drive bit is ignored and the diagnostic command is executed by both the Master and the Slave with the
Master responding with the status for both devices.
Table 17 defines the Execute Drive Diagnostic command Byte sequence. The Diagnostic codes shown in Table 18
are returned in the Error Register at the end of the command.
Table 17: Execute Drive Diagnostic
Task File Register
7
6
5
4
3
2
1
0
COMMAND
90h
DRIVE/HEAD
nu
nu
nu
D
nu
CYLINDER HI
CYLINDER LOW
SECTOR NUM
SECTOR COUNT
FEATURES
Table 18: Diagnostic Codes
Code
01h
02h
03h
04h
05h
nu
nu
nu
nu
nu
Error Type
No Error Detected
Formatter Device Error
Sector Buffer Error
ECC Circuitry Error
Controlling Microprocessor Error
Swissbit AG
Industriestrasse 4-8
Swissbit reserves the right to change products or specifications without notice.
Revision: 1.2
CH-9552 Bronschhofen
Switzerland
www.swissbit.com
industrial@swissbit.com
X-200_data_sheet_SA-QxBR_Rev12.doc
Page 12 of 47
相关PDF资料
PDF描述
1-1437653-3 CONN BARRIER STRIP 8CIRC .375
KD14.4199.107 MOD PWR ENTRY 2POLE QC 2.0MM PNL
3-644375-2 CONN RCPT 2POS 18AWG MTA-156
4306R-102-561LF RES ARRAY 560 OHM 3 RES 6-SIP
4306R-102-561 RES ARRAY 560 OHM 3 RES 6-SIP
相关代理商/技术参数
参数描述
SFSA16GBU1BR4TO-I-QT-216-STD 功能描述:FLASH X-200M SLC MSATA 16GB RoHS:是 类别:计算机，办公室 - 元件，配件 >> 固态硬盘驱动器 系列:X-200M 标准包装:1 系列:- 存储容量:64GB 存储器类型:闪存 - NAND 其它名称:VL 64 GB SSHD KITVL64GBSSHDKIT
SFSA16GBU1BR4TO-I-QT-226-STD 功能描述:FLASH SLC UDMA/MDMA/PIO 16GB RoHS:是 类别:计算机，办公室 - 元件，配件 >> 固态硬盘驱动器 系列:X-200M 标准包装:1 系列:- 存储容量:64GB 存储器类型:闪存 - NAND 其它名称:VL 64 GB SSHD KITVL64GBSSHDKIT
SFSA16GBU1BR4TO-I-QT-236-STD 功能描述:Solid State Drive (SSD) 16GB SATA II FLASH - NAND (SLC) mSATA 3.3V 制造商:swissbit na inc. 系列:X-200M 零件状态:有效 存储容量:16GB 存储器类型:FLASH - NAND（SLC） 外形尺寸:mSATA 速度 - 读取:120MB/s 速度 - 写入:95MB/s 电压 - 电源:3.3V 类型:SATA II 电流 - 最大值:- 工作温度:-40°C ~ 85°C 重量:0.24 盎司（6.84g） 大小/尺寸:50.80mm x 29.85mm x 3.30mm 标准包装:50
SFSA16GBV1BR4TO-C-QT-236-STD 制造商:SWISSBIT 功能描述:SLIM SATA X-200S DENSITY COMMERCIAL - Trays 制造商:Swissbit 功能描述:
SFSA16GBV1BR4TO-I-QT-216-STD 功能描述:FLASH X-200S SLC SLIM SATA 16GB RoHS:是 类别:计算机，办公室 - 元件，配件 >> 固态硬盘驱动器 系列:X-200S 标准包装:1 系列:- 存储容量:64GB 存储器类型:闪存 - NAND 其它名称:VL 64 GB SSHD KITVL64GBSSHDKIT
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*