Positr onic
Industries
2
SGMC
Series
HIGH DENSITY RECTANGULAR CONNECTORS with
REMOVABLE CONTACTS
EXPLODED VIEWS OF TYPICAL MATED CONNECTOR ASSEMBLIES
CONNECTOR COMPONENT DESCRIPTION AND TERMINOLOGY
A
— Male and female signal contacts, size 22. Terminations are
crimp, solder cup and printed board straight solder.
B1 — Unloaded connector insulators, male and female. Insulator
retention system retains all contact termination types.
Insulator may be used as a fixed or free connector.
B2 — Unloaded connector insulators, male and female.
Insulators of SGMC, SGM and SMPL series may be pre-
loaded per customer requirements with contacts having ter-
minations of right angle, or straight solder printed board
mount and wrap post. Unloaded insulator contact positions
remain unloaded and reserved for future use. Connectors
are fixed panel and printed board mounted.
C1 —
Polarizing guides, male and female, ensure correct align-
ment and coupling of male and female connectors. They
may also be used for keying when used in corner positions
of connector variants 75 and 104 poles.
C2 — Fixed jackscrews are stationary threaded members of the
jackscrew system.
Threaded pilots and sockets of the
jackscrew system also provide connector polarization to
insure correct connector coupling.
C3 — Long turnable jackscrews, the rotating threaded members
of the jackscrew system, are used with a free connector
having a hood for a cable support. They may be used on
all connector variants of the SGMC and SGM series con-
nectors equipped with hoods.
C4 — Vibration locking system consists of lock tabs on fixed con-
nectors and locking levers on free cable connectors. May
be used on all connector variants of SGM, SGMC and
SMPL series.
C5 — Hoods (cable adapters) are used on the free connectors to
provide cable support and contact protection.
May also
mechanically support the turnable members of the
jackscrew system.
C6 — Shells (shrouds), both male and female, are used to protect
male and female contacts from damage. Also used to pro-
vide additional polarization combinations.
C7 — Mounting angle brackets provide a means of mechanically
affixing the fixed connector to the printed board.
SMPL26F0NSSVLB
SGMC26M0NSS00JVL
SGMC26M0E1P0J0
SGM26FDS5T0000
SGMC104M00P0Z0
SGMC104F0T0000