- 您现在的位置：买卖IC网 > PDF目录85292 > SH48D50 (TELEDYNE TECHNOLOGIES INC) TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX PDF资料下载
参数资料
| 型号： | SH48D50 |
| 厂商： | TELEDYNE TECHNOLOGIES INC |
| 元件分类： | 继电器，输入/输出模块 |
| 英文描述： | TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX |
| 文件页数： | 7/8页 |
| 文件大小： | 538K |
| 代理商： | SH48D50 |
2008 TELEDYNE RELAYS
(800) 284-7007 www.teledynerelays.com
SH Page 7
SH\102008\Q4
NEW Series SH
Output to 125A, 690 Vac
High Industrial Performance (HIPpak) Solid-State Relays
Mounting
HIPpak SSRs must be mounted on heat
sinks. A large range of heat sinks is
available. For heat-sink mounting, use
thermal grease or a thermal pad with high
conductibility specified by Teledyne.
SSR Model
AC-53 Current
(motor)
AC-55b Current
(lamp)
AC-55b Current
(transformer)
AC-55b Current
(capacitor)
12A
2.5A
0.4A
XXX
25A
5A
1A
XXX
35A
9A
2A
XXX
50A
12A
3A
13A
75A
16A
6A
24A
95A
24A
9A
36A
125A
32A
12A
48A
Typical Loads (Random)
SH relays with random turn-on are designed for high inductive loads or phase angle control applications.
Our data sheet lists nominal current of power thyristors corresponding to a resistive load (AC-51).
Depending on the loads, check the inrush current at turn ON and possible overvoltages at turn OFF.
Main applications:
AC-55b — Incandescent or infrared lamps. Inrush current is generally 10 times In during few 10ms. Random relays often use in-
phase angle controllers or soft-starters with the right control.
AC-53 — Three-phase motors. 2 or 3 random turn-on relays can drive such motors.
AC-56a — Transformer loads. Very high inrush current up to 100 times In. Use a random turn-on SSR like the SH.
The table below lists recommended current values for proper lifetime expectancy.
2–2.5°C/W
Teledyne P/N FW151
1.1°C/W
Teledyne P/N FW108
0.3°C/W
Teledyne P/N FW031
Thermal Pad
Teledyne P/N –12
Typical Loads (Zero-Cross)
SH relays with zero-cross turn-on are designed for most types of loads.
Our data sheet lists the AC-51 current value corresponding to resistive loads.
For other loads, check the inrush current at turn ON and possible overvoltages at turn OFF:
AC-55b — Incandescent lamps. Inrush current is generally 10 times In during few 10ms.
AC-55a — Electric discharge lamp. These loads often have overcurrent at turn ON and overvoltage at turn OFF, so use 400VAC
SSR on 230VAC mains.
AC-58 — One-pole motors. These loads often have overcurrent at turn ON and overvoltage at turn OFF, so use 400VAC SSR on
230VAC mains and adapt the SSR current to the starting current of the motor.
AC-53 — Three-phase motors. 2 or 3 SH zero-cross relays can drive these motors, but generally use E3P/E3PT or other three-
phase relays or SH random range.
AC-56a — Transformer loads. Very high inrush current up to 100 times In. Use SH random relay or peak control SSR.
AC-56b — Capacitor loads with very high current at turn ON and overvoltage at turn OFF. Our high-voltage relays are well adapted
for high inrush current.
DIN Rail Adapter
Teledyne P/N DL12
相关PDF资料 |
PDF描述 |
|---|---|
| SML-110MTT86P | SINGLE COLOR LED, GREEN, 2.3 mm |
| SML-311YTT86J | SINGLE COLOR LED, YELLOW, 1.2 mm |
| SEL2215R | T-1 SINGLE COLOR LED, RED, 3 mm |
| SEL4228C | SINGLE COLOR LED, RED, 3.1 mm |
| SSR-240A25 | TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SH48D50/R | 制造商:Teledyne Relays 功能描述:SOLID STATE RELAY |
| SH48D75 | 制造商:Teledyne Industrial 功能描述:Output to 125A, 690 Vac HIPpak Solid-State Relays |
| SH48D75/R | 制造商:Teledyne Relays 功能描述:SOLID STATE RELAY |
| SH48D95 | 功能描述:固态继电器-工业安装 95A 24-510VAC Load 3.5-32VDC Zero X RoHS:否 制造商:Crydom 控制电压范围:4 VDC to 32 VDC 负载电压额定值:7 VDC to 72 VDC 负载电流额定值:160 A 触点形式: 输出设备:SSR 安装风格:Panel |
| SH48D95/R | 制造商:Teledyne Relays 功能描述:SOLID STATE RELAY |
发布紧急采购，3分钟左右您将得到回复。