- 您现在的位置：买卖IC网 > PDF目录16641 > SI3480-A01-GM (Silicon Laboratories Inc)IC CTLR 4/8-PORT POE 20-QFN PDF资料下载
参数资料
| 型号： | SI3480-A01-GM |
| 厂商： | Silicon Laboratories Inc |
| 文件页数： | 7/14页 |
| 文件大小： | 0K |
| 描述： | IC CTLR 4/8-PORT POE 20-QFN |
| 标准包装： | 91 |
| 应用： | 以太网供电控制器 |
| 电流 - 电源： | 13mA |
| 电源电压： | 2.7 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-VFQFN 裸露焊盘 |
| 供应商设备封装： | 20-QFN（4x4） |
| 包装： | 管件 |
| 配用： | SI3480MS8-KIT-ND - KIT EVAL 8PORT SI3480/52/SI3500 |
Si3480
4. LEDs
Upon power application or reset (by SW1 in the upper left corner), the Si3480 probes to see whether there are one
or two Si3452 ICs connected (4 or 8 ports). The Si3480 then controls the LED display in the start-up sequence
described and automatically starts managing the power among the ports as determined by the configuration pins.
After start-up, the Si3480 controls the power meter and port status LEDs give a visual indication of the status.
4.1. Start-Up LED Sequence
During start-up, the LEDs are lit in the sequence listed in Table 4 (1 second for each step).
Table 4. LED Sequence
Step
1
2
3
4
5
Action
All LEDs on.
Port 1 LED and either four or eight power meter LEDs to indicate the number of 4-port controllers found by the
Si3480 (no LEDs if no controllers are found).
Port 2 LED and zero to eight power meter LEDs to indicate the provided power as determined by reading the volt-
age at the PWRCFG pin in 25 W steps (e.g. two LEDs is 50 W).
Port 3 LED and zero to eight power meter LEDs to indicate the number of PoE+ ports as determined by reading
the voltage at the POECFG pin.
Port 4 LED and zero to eight power meter LEDs to indicate the number of high-priority ports as determined by
reading the voltage at the PRIOCFG pin.
4.2. Port Status LEDs
After the start-up sequence, the port status LEDs display the patterns listed in Table 5 to indicate port status.
Table 5. Port LED Pattern Definitions
Port LED Pattern
Flashing once every two seconds
Continuously lit
Blinks off once every two seconds
Flashing five times per second
Flashing twice every two seconds
Meaning
Detection and Classification in process
PoE port is on
PoE+ port is on with a class 4 PD load (30 W granted)
Port overloaded
Power denied due to lack of power
For a port overload, an open circuit must be seen before the port is re-enabled; that is, the PD must be unplugged,
and the overload must be cleared.
Ports are turned off in priority order if more than the available power is being consumed. If the amount of power
consumed is >10% more than the available power, all low-priority ports are shut off immediately.
Ports are not granted power unless there is enough power available to grant the requested power (based on
classification) with 15% margin. The 15% margin generally avoids situations where a port is granted power and
then later turned off due to lack of power.
If a port is turned off or denied power due to a lack of available power, the LED continues flashing twice every two
seconds until enough power is available to turn the port on or the PD is unplugged.
4.3. Power Meter LEDs
The power meter LEDs light consecutively, indicating the amount of power that is being consumed. There are eight
LEDs in the power meter. The LEDs will light in bar graph fashion:
Number_LEDs_Lit = 8 x Total_Power_Consumed / (0.85 x Provided_Power – 4 W) (rounded down)
The eighth power meter LED is generally a red LED. If this LED is lit, it means that there is not enough power
available to grant even a Class 1 load power and maintain a 15% margin. The eighth LED is flashed five times per
second if the Si3452 controllers report a power supply undervoltage.
Rev. 1.0
7
相关PDF资料 |
PDF描述 |
|---|---|
| V24C12C100BL2 | CONVERTER MOD DC/DC 12V 100W |
| SCRH104R-150 | INDUCTOR SMD 15UH 3.60A 100KHZ |
| V24B12E150BG | CONVERTER MOD DC/DC 12V 150W |
| H3DKH-1406G | IDC CABLE - HKR14H/AE14G/HPK14H |
| V24B12E150B | CONVERTER MOD DC/DC 12V 150W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SI3480-A01-GMR | 功能描述:电源开关 IC - POE / LAN 8-port Power Manager RoHS:否 制造商:Fairchild Semiconductor 开关数量:Single 开关配置:SPST 开启电阻（最大值）:7.3 Ohms 串话: 带宽: 开启时间（最大值）:13 ns 关闭时间（最大值）:20 ns 切换电压（最大）: 工作电源电压:8 V to 26 V 最大工作温度:+ 125 C 安装风格:Through Hole 封装 / 箱体:TO-220F-6 |
| Si3480MS8-KIT | 功能描述:电源管理IC开发工具 8p Pwr Mngr Eval Kit Si3452/3PSE Prt Ctrl RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| SI3481DV | 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:P-Channel 30-V (D-S) MOSFET |
| SI3481DV_06 | 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:P-Channel 30-V (D-S) MOSFET |
| SI3481DV-T1-E3 | 功能描述:MOSFET 30V 5.3A 0.048Ohm RoHS:否 制造商:STMicroelectronics 晶体管极性:N-Channel 汲极/源极击穿电压:650 V 闸/源击穿电压:25 V 漏极连续电流:130 A 电阻汲极/源极 RDS（导通）:0.014 Ohms 配置:Single 最大工作温度: 安装风格:Through Hole 封装 / 箱体:Max247 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。