- 您现在的位置：买卖IC网 > PDF目录372149 > SM320C6701W16 (Texas Instruments, Inc.) FLOATING-POINT DIGITAL SIGNAL PROCESSOR PDF资料下载
参数资料
| 型号： | SM320C6701W16 |
| 厂商： | Texas Instruments, Inc. |
| 元件分类： | 数字信号处理 |
| 英文描述： | FLOATING-POINT DIGITAL SIGNAL PROCESSOR |
| 中文描述： | 浮点数字信号处理器 |
| 文件页数： | 26/64页 |
| 文件大小： | 939K |
| 代理商： | SM320C6701W16 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页当前第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页
SGUS030B
–
APRIL 2000
–
REVISED MAY 2001
26
POST OFFICE BOX 1443
HOUSTON, TEXAS 77251
–
1443
clock PLL (continued)
CLKMODE0
CLKMODE1
PLL
PLLV
CLKIN
LOOP FILTER
PLLCLK
PLLMULT
CLKIN
P
Internal to
’
C6701
CPU
CLOCK
P
1
0
3.3V
(see Table 3)
PLLFREQ1
PLLFREQ2
PLLFREQ3
NOTES: A. For a system with ONLY PLL x1 (bypass) mode, short the PLLF terminal to the PLLG terminal.
B. The 3.3-V supply for the EMI filter must be from the same 3.3-V power plane supplying the I/O voltage, DVDD.
Figure 6. External PLL Circuitry for x1 (Bypass) Mode Only
power-supply sequencing
TI DSPs do not require specific power sequencing between the core supply and the I/O supply. However,
systems should be designed to ensure that neither supply is powered up for extended periods of time if the other
supply is below the proper operating voltage.
system-level design considerations
System-level design considerations, such as bus contention, may require supply sequencing to be
implemented. In this case, the core supply should be powered up at the same time as, or prior to (and powered
down after), the I/O buffers. This is to ensure that the I/O buffers receive valid inputs from the core before the
output buffers are powered up, thus, preventing bus contention with other chips on the board.
power-supply design considerations
For systems using the C6000
DSP platform of devices, the core supply may be required to provide in excess
of 2 A per DSP until the I/O supply is powered up. This extra current condition is a result of uninitialized logic
within the DSP(s) and is corrected once the CPU sees an internal clock pulse. With the PLL enabled, as the
I/O supply is powered on, a clock pulse is produced stopping the extra current draw from the supply. With the
PLL disabled, an external clock pulse may be required to stop this extra current draw. A normal current state
returns once the I/O power supply is turned on and the CPU sees a clock pulse. Decreasing the amount of time
between the core supply power up and the I/O supply power up can minimize the effects of this current draw.
A dual-power supply with simultaneous sequencing, such as available with TPS563xx controllers or PT69xx
plug-in power modules, can be used to eliminate the delay between core and I/O power up [see the
Using the
TPS56300 to Power DSPs
application report (literature number SLVA088)]. A Schottky diode can also be used
to tie the core rail to the I/O rail, effectively pulling up the I/O power supply to a level that can help initialize the
logic within the DSP.
Core and I/O supply voltage regulators should be located close to the DSP (or DSP array) to minimize
inductance and resistance in the power delivery path. Additionally, when designing for high-performance
applications utilizing the C6000
platform of DSPs, the PC board should include separate power planes for
core, I/O, and ground, all bypassed with high-quality low-ESL/ESR capacitors.
相关PDF资料 |
PDF描述 |
|---|---|
| SMJ320C6201BS14 | FLOATING-POINT DIGITAL SIGNAL PROCESSOR |
| SMJ320C6201BS16 | FLOATING-POINT DIGITAL SIGNAL PROCESSOR |
| SMJ320C6201BW14 | FLOATING-POINT DIGITAL SIGNAL PROCESSOR |
| SMJ320C6201BW16 | FLOATING-POINT DIGITAL SIGNAL PROCESSOR |
| SMJ320C6203S14 | FLOATING-POINT DIGITAL SIGNAL PROCESSOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SM320C6701ZMBW14 | 功能描述:数字信号处理器和控制器 - DSP, DSC Floating Point Dig Signal Proc Military RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT |
| SM320C6711B-EP | 制造商:TI 制造商全称:Texas Instruments 功能描述:FLOATING-POINT DIGTAL SIGNAL PROCESSORS |
| SM320C6711C-EP | 制造商:TI 制造商全称:Texas Instruments 功能描述:FLOATING-POINT DIGTAL SIGNAL PROCESSORS |
| SM320C6711D-EP | 制造商:TI 制造商全称:Texas Instruments 功能描述:FLOATING-POINT DIGTAL SIGNAL PROCESSORS |
| SM320C6711-EP | 制造商:TI 制造商全称:Texas Instruments 功能描述:FLOATING-POINT DIGTAL SIGNAL PROCESSORS |
发布紧急采购，3分钟左右您将得到回复。