- 您现在的位置：买卖IC网 > PDF目录219856 > SMAJ15A 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC PDF资料下载
参数资料
| 型号： | SMAJ15A |
| 元件分类： | 参考电压二极管 |
| 英文描述： | 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC |
| 封装： | GREEN, PLASTIC, SMA, 2 PIN |
| 文件页数： | 5/5页 |
| 文件大小： | 145K |
| 代理商： | SMAJ15A |
TVS APPLICATION NOTES:
Version : F11
Any combination of this three, or any one of these applivations, will prevent damage to the load. This would
require varying trade-offs in power supply protection versus maintenance(changing the time fuse).
An additional method is to utilize the Trans
RECOMMENDED PAD SIZES
The pad dimensions should be 0.010"(0.25mm) longer than the contact size, in the lead axis.
This allows a solder filler to form, see figure below. Contact factort for soldering methods.
Transient Voltage Suppressors may be used at various points in a circuit to provide various degrees of
protection. The following is a typical linear power supply with transient voltage suppressor units plaved at
different points. All provide protection
Transient Voltage Suppressor 1 provides maximum protection. However, the system will probably require
replacement of the line fuse(F) since it provides a dominant portion of the series impedance when a surge is
encountered.
Hower, we do not recommend to use the TVS diode here, unless we can know the electric circuit
impedance and the magnitude of surge rushed into the circuit. Otherwise the TVS diode is easy to be
destroyed by voltage surge.
Transient Voltage Suppressor 2 provides execllent protection of circuitry excluding the transformer(T).
However, since the transformer is a large part of the series impedance, the chance of the line fuse opening
during the surge condition is reduced.
Transient Voltage Suppressor 3 provides the load with complete protection. It uses a unidirectional
Transient Voltage Suppressor, which is a cost advantage. The series impedance now includes the line fuse,
transformer, and bridge rectifier(B) so failure
相关PDF资料 |
PDF描述 |
|---|---|
| SMAJ17C | 400 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC |
| SMAJ60 | 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC |
| SMAJ7.5CA | 400 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC |
| SMAJ8.5C | 400 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC |
| SBH1040TL | 10 A, 40 V, SILICON, RECTIFIER DIODE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SMAJ15A | 制造商:Bourns Inc 功能描述:Diode 制造商:STMicroelectronics 功能描述:DIODE TVS SMA 400W 15V |
| SMAJ15A/1 | 功能描述:TVS 二极管 - 瞬态电压抑制器 400W 15V 5% Uni RoHS:否 制造商:Vishay Semiconductors 极性:Bidirectional 工作电压: 击穿电压:58.9 V 钳位电压:77.4 V 峰值浪涌电流:38.8 A 系列: 封装 / 箱体:DO-214AB 最小工作温度:- 55 C 最大工作温度:+ 150 C |
| SMAJ15A/11 | 功能描述:TVS 二极管 - 瞬态电压抑制器 400W 15V 5% Uni RoHS:否 制造商:Vishay Semiconductors 极性:Bidirectional 工作电压: 击穿电压:58.9 V 钳位电压:77.4 V 峰值浪涌电流:38.8 A 系列: 封装 / 箱体:DO-214AB 最小工作温度:- 55 C 最大工作温度:+ 150 C |
| SMAJ15A/11 | 制造商:Vishay Semiconductors 功能描述:DIODE TVS SMA 400W 15V |
| SMAJ15A/13 | 功能描述:TVS 二极管 - 瞬态电压抑制器 400W 15V 5% Uni RoHS:否 制造商:Vishay Semiconductors 极性:Bidirectional 工作电压: 击穿电压:58.9 V 钳位电压:77.4 V 峰值浪涌电流:38.8 A 系列: 封装 / 箱体:DO-214AB 最小工作温度:- 55 C 最大工作温度:+ 150 C |
发布紧急采购，3分钟左右您将得到回复。