参数资料
型号: SMARTALPHA-433
厂商: RF Solutions
文件页数: 5/15页
文件大小: 0K
描述: SMART MODULE ALPHA MODEM 433MHZ
标准包装: 1
频率: 433MHz
数据传输率 - 最大: 19.2kbps
调制或协议: *
应用: 通用
功率 - 输出: 0dBm
灵敏度: -110dBm
电源电压: 2.3 V ~ 3.6 V
电流 - 接收: 15mA
电流 - 传输: 26mA
数据接口: PCB,通孔
天线连接器: *
工作温度: -20°C ~ 70°C
封装/外壳: 16-DIP 模块
包装: 散装
其它名称: SMARTALPHA-433F
SMARTALPHA-433F-ND
S MART ALPHA RF T RANSCEIVER
3.
Configuration
The configuration of the SmartALPHA module may be changed by placing the SmartALPHA in Configuration
mode, then sending a set of configuration data bytes to the module on the Tx pin.
To place the SmartALPHA in Configuration mode the user needs to send “+++” (three plus characters) within
the 10mS timeout for each character. The SmartALPHA responds be returning the Configuration data bytes.
The SmartALPHA is now on Configuration mode.
To exit Configuration mode the user needs to send “---“ (three minus characters) within the 10mS timeout for
each character. The SmartALPHA will not return a response. The SmartALPHA is now in data mode.
Byte
0
1
2
3
4
5
6
7
Name
Destination Address
SmartALPHA Address
MSB
LSB
MSB
LSB
Description
Default Supplied Value
7E hex
7E hex
7E hex
7E hex
7E hex
7E hex
7E hex
7E hex
8
9
RF Channel high byte
RF Channel low byte
TX / RX Frequency
TX / RX Frequency
06 hex (434.133Mhz)
75 hex (434.133Mhz)
0 = 0 dBm
1 = -3 dBm
2 = -6 dBm
10
Tx Power
3 = -9 dBm
4 = -12 dBm
0 (0 dBm)
5 = -15 dBm
6 = -18 dBm
7 = -21 dBm
A3 hex = 1200 bps
91 hex = 2400 bps
47 hex = 4800 bps
11
RF transmission speed
23 hex = 9600 bps
23 hex
11 hex = 19200 bps
08 hex = 38400 bps
05 hex = 57600 bps
The RF Channel is calculated as:
433 MHz working frequency: Config value (decimal) = ((Fo/10)-43)*4000
868 MHz working frequency: Config value (decimal) = ((Fo/20)-43)*4000
915 MHz working frequency: Config value (decimal) = ((Fo/30)-30)*4000
(Fo = Required Frequency)
Please Note, the calculated value must be converted into binary. The high byte is placed in byte 8 and
the low byte in byte 9. The Config value MUST be in the range 96 to 3903 (decimal). Both bytes must be
present for the channel to be accepted.
While the SmartALPHA is in configuration mode, then the module will send the current configuration
back to the host each time a data packet is received. To retrieve the current configuration without
changing any options the host can send a single byte to the module and wait for the response.
It is not necessary to send all configuration bytes to the module, but all data sent must be valid. For example to
change the destination address the host may just send four bytes. Configuration data excluded from the end of
the data stream will be unchanged. The SmartALPHA module will accept a short configuration after a 10ms
DSSMARTALPHA-5
? 2009 REG No 277 4001, ENGLAND.
Page 5
相关PDF资料
PDF描述
IF-10-16 XFRMR 115/230V 8V 1.25A 10VA PCB
1-582118-2 CONN TEST PROBE TIN RED PCB
A-20GV-K BASIC SWITCH
XBP24-BWIT-004 MODULE XBEE PRO ZNET 2.5 W/WHIP
A41-43-515 XFRMR PWR 115/230V 5V 2A 43VA
相关代理商/技术参数
参数描述
SMARTALPHA-868 功能描述:SMART MODULE ALPHA MODEM 868MHZ RoHS:是 类别:RF/IF 和 RFID >> RF 收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:30 系列:- 频率:4.9GHz ~ 5.9GHz 数据传输率 - 最大:54Mbps 调制或协议:* 应用:* 功率 - 输出:-3dBm 灵敏度:- 电源电压:2.7 V ~ 3.6 V 电流 - 接收:* 电流 - 传输:* 数据接口:PCB,表面贴装 存储容量:- 天线连接器:PCB,表面贴装 工作温度:-25°C ~ 85°C 封装/外壳:68-TQFN 裸露焊盘 包装:管件
SMARTALPHA-EVAL 功能描述:BOARD EVAL SMART ALPHA RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件,板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
SMARTCARD 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Ordering Information For Package And Delivery
SMARTCELL 制造商:American Power Conversion Corp (APC by Schneider Electric) 功能描述:MATRIX-UPS SMARTCELL BATTERY PACK 208/240V 制造商:Schneider Electric 功能描述:APC MATRIX-UPS SMARTCELL BA - Bulk
SMARTCELL-DF 制造商:Schneider Electric 功能描述:SMARTCELL - Bulk