- 您现在的位置：买卖IC网 > PDF目录40342 > SMDA05CN-5.TE 300 W, BIDIRECTIONAL, 5 ELEMENT, SILICON, TVS DIODE PDF资料下载
参数资料
| 型号： | SMDA05CN-5.TE |
| 元件分类： | TVS二极管 - 瞬态电压抑制 |
| 英文描述： | 300 W, BIDIRECTIONAL, 5 ELEMENT, SILICON, TVS DIODE |
| 封装： | PLASTIS, SO-8 |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 代理商： | SMDA05CN-5.TE |
4
2003 Semtech Corp.
www.semtech.com
PROTECTION PRODUCTS
SMDA05CN-5 THRU SMDA15CN-5
Protection for Four Bidirectional Lines
Protection for Five Bidirectional Lines
Device Connection Options for Protection of Four or
Five Data Lines
The SMDAxxCN-5 can be configured to protect either
four or five bidirectional data lines. The options for
connecting the devices are as follows:
1. Bidirectional protection of four I/O lines is achieved
by connecting pins 1, 2, 3, and 4 to the data lines.
Pins 5, 6, 7, and 8 are connected to ground. The
ground connection should be made directly to the
ground plane for best results. The path length is
kept as short as possible to reduce the effects of
parasitic inductance in the board traces. In this
configuration, the device can withstand the maxi-
mum specified transient impulse on four lines
simultaneously.
2. Bidirectional protection of five I/O lines is achieved
by connecting pins 1, 2, 3, 4, and 5 to the data
lines. Pins 6, 7, and 8 are connected to ground.
The ground connection should be made directly to
the circuit board ground plane for best results. In
this configuration, the device can withstand the
maximum rated transient impulse on any two lines
simultaneously.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
Minimize the path length between the TVS and the
protected line.
Minimize all conductive loops including power and
ground loops.
The ESD transient return path to ground should be
kept as short as possible.
Never run critical signals near board edges.
Use ground planes whenever possible.
From Connector
To Protected IC
From Connector
To Protected IC
Applications Information
相关PDF资料 |
PDF描述 |
|---|---|
| SMDA05C | 300 W, BIDIRECTIONAL, 4 ELEMENT, SILICON, TVS DIODE |
| SMDA15 | 300 W, UNIDIRECTIONAL, 4 ELEMENT, SILICON, TVS DIODE |
| SMDA15C | 300 W, BIDIRECTIONAL, 4 ELEMENT, SILICON, TVS DIODE |
| SMDA12.T | 300 W, UNIDIRECTIONAL, 4 ELEMENT, SILICON, TVS DIODE, MS-012AA |
| SMDA15.TBT | 300 W, UNIDIRECTIONAL, 4 ELEMENT, SILICON, TVS DIODE, MS-012AA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SMDA05CT | 制造商:Semtech Corporation 功能描述:DIODE TVS 5V |
| SMDA05CT | 制造商:Semtech Corporation 功能描述:TVS Diode |
| SMDA05CTB | 制造商:SEMTECH 制造商全称:Semtech Corporation 功能描述:Bidirectional TVS Array for Protection of Four Lines |
| SMDA05CTR | 功能描述:TVS DIODE 5VWM 9.8VC 8SO 制造商:smc diode solutions 系列:- 包装:剪切带（CT） 零件状态:在售 类型:齐纳 单向通道:- 双向通道:4 电压 - 反向关态（典型值）:5V（最大） 电压 - 击穿（最小值）:6V 电压 - 箝位（最大值）@ Ipp:9.8V 电流 - 峰值脉冲（10/1000μs）:- 功率 - 峰值脉冲:300W 电源线路保护:无 应用:通用 不同频率时的电容:300pF @ 1MHz 工作温度:-55°C ~ 125°C（TJ） 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商器件封装:8-SO 标准包装:1 |
| SMDA05E3/TR13 | 制造商:Microsemi Corporation 功能描述:4 LINE UNI-DIR, 300W (8/20US), STAND-OFF VOLTAGE = 5V - Tape and Reel 制造商:Microsemi Corporation 功能描述:TVS ARRAY UNIDIR 300W 5V 8SOIC |
发布紧急采购，3分钟左右您将得到回复。