- 您现在的位置：买卖IC网 > Datasheet目录357 > SOT223-3EV-VREG (Microchip Technology)BOARD EVAL SOT223-3 VOLTAGE REG Datasheet资料下载
参数资料
| 型号： | SOT223-3EV-VREG |
| 厂商： | Microchip Technology |
| 文件页数： | 11/20页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL SOT223-3 VOLTAGE REG |
| 标准包装： | 1 |
| 每 IC 通道数： | 1 - 单 |
| 稳压器类型： | 正，固定式 |
| 板类型： | 部分填充 |
| 已供物品： | 板，CD |
| 已用 IC / 零件： | SOT-23-3 封装 |
| 产品目录页面： | 668 (CN2011-ZH PDF) |
SOT223-3 VOLTAGE REGULATOR
EVALUATION BOARD USER ’S GUIDE
Chapter 2. Installation and Operation
2.1
2.2
2.3
INTRODUCTION
The SOT223-3 Voltage Regulator Evaluation Board is designed to facilitate evaluation
of Microchip’s voltage regulators or to be used as a stand-alone voltage regulator
board. Jumpers have been placed on the board to ease the test of the specific voltage
regulator parameters.
The SOT223-3 Voltage Regulator Evaluation Board kit comes with a 1 μ F ceramic input
and output capacitor soldered to the board. The board has two unpopulated resistor
locations that may be used for loads.
FEATURES
The SOT223-3 Voltage Regulator Evaluation Board has the following features:
? Input and Output headers for future connection to Line Step and Load Step
modules
? Ample testpoints to attach multimeters, power supplies, and loads
? Jumper to select ground current measurement
? Jumper to select two different load resistors
? Jumper to connect input capacitor to circuit
GETTING STARTED
The SOT223-3 Voltage Regulator Evaluation Board is fully assembled and tested. For
operating, a user supplied voltage regulator and a supply voltage source are required.
Some of the tests that may be completed using the SOT223-3 Voltage Regulator
Evaluation Board are described in the next subchapters.
2.3.1
Ground Current and Quiescent Current
When measuring ground current, jumper JP3 should be removed, otherwise leave
jumper JP3 on. To measure ground current, perform the following steps:
1. Add desired load resistors to R5 and R6.
2. Remove jumpers JP3, JP4, and JP5.
3. Connect an ammeter across testpoints TP6(+) and TP7(-). Select the
appropriate meter scale for the device that is being evaluated.
4. Connect a voltmeter across testpoints TP9(+) and TP10(-).
5. Add jumper JP1.
6. Apply source voltage to testpoints TP1(+) and TP2(-).
7. Verify that the voltage across testpoints TP9 and TP10 is within the expected
range of the tested device.
8. Read the Ground Current directly from the ammeter connected to the testpoints
TP6 and TP7.
9. Vary the input voltage to obtain data for ground current versus input voltage. If no
load is attached to the output of the voltage regulator, the measured “ground
current” is also called the “quiescent current” of the regulator.
? 2008 Microchip Technology Inc.
DS51779A-page 7
相关PDF资料 |
PDF描述 |
|---|---|
| SOT223-5EV-VREG | EVALUATION BOARD VOLTAGE REG |
| SOT23-3EV-VREG | BOARD EVAL VOLT REG SOT23-3 |
| SOT23-5EV-VREG | EVAL BOARD SOT23-5 VOLTAGE REG |
| SP5004EGP | SUPERPRO 5004EGP PROGRAMMER |
| SP7121EK-L | IC LED DRVR BACKLIGHT SOT23-6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SOT223-5 | 制造商:ROHM 制造商全称:Rohm 功能描述:LSI Assembly |
| SOT223-5EV-VREG | 功能描述:电源管理IC开发工具 SOT223-5 Volt Reg Eval Board RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| SOT223B | 制造商:WILLOW 制造商全称:Willow Technologies Ltd 功能描述:SMT-Precision-R-Networks |
| SOT223D | 制造商:WILLOW 制造商全称:Willow Technologies Ltd 功能描述:SMT-Precision-R-Networks |
| SOT223L | 制造商:WILLOW 制造商全称:Willow Technologies Ltd 功能描述:SMT-Precision-R-Networks |
发布紧急采购，3分钟左右您将得到回复。