- 您现在的位置：买卖IC网 > PDF目录297420 > SP-FE-FX-INFF FIBER OPTIC TRANSCEIVER, 1270-1380nm, 155Mbps(Tx), 155Mbps(Rx), SURFACE MOUNT, LC CONNECTOR PDF资料下载
参数资料
| 型号： | SP-FE-FX-INFF |
| 元件分类： | 光收发 |
| 英文描述： | FIBER OPTIC TRANSCEIVER, 1270-1380nm, 155Mbps(Tx), 155Mbps(Rx), SURFACE MOUNT, LC CONNECTOR |
| 封装： | ROHS COMPLIANT PACKAGE |
| 文件页数： | 7/9页 |
| 文件大小： | 219K |
| 代理商： | SP-FE-FX-INFF |
125~155Mbps Spring Latch SFP Transceiver
2 km multimode transmission
June 05, 2008
Source Photonics Proprietary and Confidential, Do Not Copy or Distribute
Page 7 of 9
3
TX Disable
Transmitter Disable
3
Note 2
4
MOD-DEF2
Module Definition 2
3
Note 3
5
MOD-DEF1
Module Definition 1
3
Note 3
6
MOD-DEF0
Module Definition 0
3
Note 3
7
Rate Select
Not Connected
3
8
LOS
Loss of Signal
3
Note 4
9
VeeR
Receiver Ground
1
10
VeeR
Receiver Ground
1
11
VeeR
Receiver Ground
1
12
RD-
Inv. Received Data Out
3
Note 5
13
RD+
Received Data Out
3
Note 5
14
VeeR
Receiver Ground
1
15
VccR
Receiver Power
2
16
VccT
Transmitter Power
2
17
VeeT
Transmitter Ground
1
18
TD+
Transmit Data In
3
Note 6
19
TD-
Inv. Transmit Data In
3
Note 6
20
VeeT
Transmitter Ground
1
Notes:
1. TX Fault is an open collector output, which should be pulled up with a 4.7k~10k
resistor on the host
board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a
laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the
module with a 4.7k~10k
resistor. Its states are:
Low (0~0.8V):
Transmitter on
(>0.8V, <2.0V):
Undefined
High (2.0~3.465V):
Transmitter Disabled
Open:
Transmitter Disabled
3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7k~10k
resistor on
the host board. The pull-up voltage shall be VccT or VccR.
MOD-DEF 0 is grounded by the module to indicate that the module is present
MOD-DEF 1 is the clock line of two wires serial interface for serial ID
MOD-DEF 2 is the data line of two wires serial interface for serial ID
4. LOS is an open collector output, which should be pulled up with a 4.7k~10k
resistor on the host board to
a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
In the low state, the output will be pulled to less than 0.8V.
5. These are the differential receiver output. They are internally AC-coupled 100 differential lines which
should be terminated with 100 (differential) at the user SERDES.
6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100 differential
termination inside the module.
相关PDF资料 |
PDF描述 |
|---|---|
| SP35P01000041/4 | PUSHBUTTON SWITCH, SPDT, LATCHED AND MOMENTARY, 1A, 30VDC, THROUGH HOLE-STRAIGHT |
| SP35P01000041 | PUSHBUTTON SWITCH, SPDT, LATCHED AND MOMENTARY, 1A, 30VDC, THROUGH HOLE-STRAIGHT |
| SP35S02007746 | PUSHBUTTON SWITCH, SPDT, LATCHED AND MOMENTARY, 1A, 30VDC, PANEL MOUNT-THREADED |
| SP35W02000049 | PUSHBUTTON SWITCH, SPDT, LATCHED AND MOMENTARY, 1A, 30VDC, THROUGH HOLE-RIGHT ANGLE |
| SP45W00000042 | PUSHBUTTON SWITCH, DPDT, LATCHED AND MOMENTARY, 0.1A, 30VDC, THROUGH HOLE-RIGHT ANGLE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SPFEIM100_G | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:Fiber Optic Transceiver For Fast Ethernet |
| SP-FE-LX-CDA | 制造商:SOURCE 制造商全称:Source Photonics, Inc. 功能描述:Fast Ethernet SFP Transceiver |
| SP-FE-LX-CDC | 制造商:SOURCE 制造商全称:Source Photonics, Inc. 功能描述:Fast Ethernet SFP Transceiver |
| SP-FE-LX-CNA | 制造商:SOURCE 制造商全称:Source Photonics, Inc. 功能描述:Fast Ethernet SFP Transceiver |
| SP-FE-LX-CNC | 制造商:SOURCE 制造商全称:Source Photonics, Inc. 功能描述:Fast Ethernet SFP Transceiver |
发布紧急采购，3分钟左右您将得到回复。