参数资料
型号: SP238AET-L
厂商: Exar Corporation
文件页数: 8/12页
文件大小: 0K
描述: IC DVR/RCVR RS232 MULTI 24WSOIC
标准包装: 31
类型: 收发器
驱动器/接收器数: 4/4
规程: RS232
电源电压: 4.5 V ~ 5.5 V
安装类型: 表面贴装
封装/外壳: 24-SOIC(0.295",7.50mm 宽)
供应商设备封装: 24-SOIC W
包装: 管件
其它名称: 1016-1687
SP238AET-L-ND
5
Exar Corporation 48720 Kato Road, Fremont CA, 94538 (50)668-707 www.exar.com
SP238A_00_0740
Phase 1
Vss charge store and double: The positive ter-
minals of capacitors C and C2 are charged
from Vcc with their negative terminals initially
connected to ground. C+ is then connected
to ground and the stored charge from C- is
superimposed onto C2-. Since C2+ is still con-
nected to Vcc the voltage potential across C2 is
now 2 x Vcc.
Phase 2
Vss transfer and invert: Phase two connects
the negative terminal of C2 to the Vss storage
capacitor and the positive terminal of C2 to
ground. This transfers the doubled and inverted
(V-) voltage onto C4. Meanwhile, capacitor C
is charged from Vcc in order to prepare it for its
next phase.
Phase 3
Vdd charge store and double: Phase three is
identicaltothefirstphase.Thepositivetermi-
nals of C and C2 are charged from Vcc with
their negative terminals initially connected to
ground. C+ is then connected to ground and
the stored charge from C- is superimposed
onto C2-. Since C2+ is still connected to Vcc
the voltage potential across capacitor C2 is now
2 x Vcc.
Phase 4
Vdd transfer: The fourth phase connects the
negative terminal of C2 to ground and the posi-
tive terminal of C2 to the Vdd storage capacitor .
This transfers the doubled (V+) voltage onto C3.
Meanwhile, capacitor C is charged from Vcc to
prepare it for its next phase.
Under lightly loaded conditions, the intelligent
pumposcillatormaximizesefficiencybyrunning
only as needed to maintain V+ and V- voltage
levels. Since interface transceivers spend most
oftheirtimeatidle,thispower-efficientinnova-
tion can greatly reduce total power consump-
tion. This improvement is made possible by
the independent phase sequences of the Exar
charge pump design.
DeScRiPtion
The clock rate of the charge pump typically op-
erates greater than 70kHz allowing the pump to
operateefficientlyusingsmall0.1uFcapacitors.
Efficientoperationdependsontherapidcharg-
ing and discharging of C and C2. Therefore,
the capacitors should be mounted as close as
possible to the IC and have a low ESR (equiva-
lent series resistance). Inexpensive, surface
mount ceramic capacitors are ideal for use on
charge pump. If polarized capacitors are used
the positive and negative terminals should be
connected as shown on the typical operating
circuit. A diagram of the 4 individual phases is
shown in Figure .
相关PDF资料
PDF描述
D4FBAU CONN RCPT FEMALE 4PIN BLACK/GOLD
MAX1086ETA+T IC ADC 10BIT 150KSPS 8-TDFN
VI-B54-IV-F2 CONVERTER MOD DC/DC 48V 150W
VI-2TP-IW-F3 CONVERTER MOD DC/DC 13.8V 100W
VE-BTJ-MX-F3 CONVERTER MOD DC/DC 36V 75W
相关代理商/技术参数
参数描述
SP238AET-L/TR 功能描述:RS-232接口集成电路 5V 4-DRVR/4-RCVR RS-232 -40-85C RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装:
SP2394 制造商:未知厂家 制造商全称:未知厂家 功能描述:Thermoelectric Cooler
SP2394-01AB 制造商:未知厂家 制造商全称:未知厂家 功能描述:Thermoelectric Cooler
SP2394-02AB 制造商:未知厂家 制造商全称:未知厂家 功能描述:Thermoelectric Cooler
SP2394-03AB 制造商:未知厂家 制造商全称:未知厂家 功能描述:Thermoelectric Cooler