- 您现在的位置：买卖IC网 > PDF目录193593 > SP6201ER-L-ADJ 2.7 V-6 V ADJUSTABLE POSITIVE LDO REGULATOR, 0.5 V DROPOUT, PDSO8 PDF资料下载
参数资料
| 型号： | SP6201ER-L-ADJ |
| 元件分类： | 可调正电压单路输出LDO稳压器 |
| 英文描述： | 2.7 V-6 V ADJUSTABLE POSITIVE LDO REGULATOR, 0.5 V DROPOUT, PDSO8 |
| 封装： | LEAD FREE, 2 X 3 MM, MO-229CVCED-2, DFN-8 |
| 文件页数： | 11/17页 |
| 文件大小： | 426K |
| 代理商： | SP6201ER-L-ADJ |
3
Date: 6/1/05
SP6200/6201 100/200mA CMOS LDO Regulator
Copyright 2005 Sipex Corporation
Note 1. Exceeding the absolute maximum rating may damage the device.
Note 2. The device is not guaranteed to function outside its operating rating.
Note 3. The maximum allowable power dissipation at any T
A (ambient temperature) is PD (MAX) = (TJ (MAX) – TA) / θA
.
Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will
go into thermal shutdown. The θ
JA of the SP6200/6201 (all versions) is 90°C/W for the SOT-23-5 and 59°C/W for
the DFN package on a standard 4 layer board (see “Thermal Considerations” section for further details).
Note 4. Output voltage temperature coefficient is defined as the worst case voltage change divided by the total
temperature range.
Note 5. Load Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are
tested for load regulation in the load range; from 0.1mA to 100mA, SP6200; from 0.1mA to 200mA, SP6201. Changes
in output voltage due to heating effects are covered by the thermal regulation specification. Not applicable to output
voltages less than 2.5V.
Note 6. Dropout Voltage is defined as the input to output differential at which the output voltage drops 2% below
its nominal value measured at 1V differential. Not applicable to output voltages less than 2.7V.
Note 7. Ground pin current is the regulator quiescent current. The total current drawn from the supply is the sum
of the load current plus the ground pin current.
Note 8. Thermal regulation is defined as the change in output voltage at a time ”t” after a change in power dissipation
is applied, excluding load or line regulation effects. Specifications are for a 100mA load pulse at V
IN = 6V for t = 10ms.
ELECTRICAL CHARACTERISTICS: Continued
V
IN = VOUT +1V, VO = 5V for ADJ, IL = 100A, CIN = 1.0F, COUT = 1.0F, TJ = 25
°C , unless otherwise specified. The denotes the
specifications which apply over the full operating temperature range, unless otherwise specified.
PARAMETER
MIN
TYP
MAX
UNITS
CONDITIONS
Thermal Regulation,
0.05
%/W
Note 8, (VO/PD)
Output Noise, (e no)IL = 50mA, CL = 1F
150
Vrms
0.1F from VOUT to Adj.
10Hz to 100kHz
ENABLE INPUT
Enable Input Logic-Low Voltage,
0.4
V
Regulator Shutdown
(VIL)
Enable Input Logic-High Voltage,
1.6
V
Regulator Enabled
(VIH)
Enable Input Current, (IIL), (IIH)
0.01
1
A
VIL < 0.4V
0.01
1
A
VIH > 2.0V
Reset Not Output
-2
-4
-6
%
Threshold
相关PDF资料 |
PDF描述 |
|---|---|
| SP6341EK1-L-Z-J-D/TR | 3-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8 |
| SP6341EK1-L-T-A-C | 3-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8 |
| SP6341EK1-L-T-C-C | 3-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8 |
| SP6341EK1-L-T-D-A | 3-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8 |
| SP6341EK1-L-T-J-A/TR | 3-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SP6203 | 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:Low Noise, 300mA and 500mA CMOS LDO Regulators |
| SP6203_07 | 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:Low Noise, 300mA and 500mA CMOS LDO Regulators |
| SP6203EM5 | 制造商:Exar Corporation 功能描述: |
| SP6203EM5/TR | 制造商:Exar Corporation 功能描述:Voltage Regulator |
| SP6203EM5-1-8 | 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:Low Noise, 300mA and 500mA CMOS LDO Regulators |
发布紧急采购，3分钟左右您将得到回复。