- 您现在的位置：买卖IC网 > PDF目录16344 > SPM3012T-3R3M (TDK Corporation)INDUCTOR 3.3UH 1.5A 20% SMD PDF资料下载
参数资料
| 型号： | SPM3012T-3R3M |
| 厂商： | TDK Corporation |
| 文件页数： | 2/25页 |
| 文件大小： | 0K |
| 描述： | INDUCTOR 3.3UH 1.5A 20% SMD |
| 标准包装： | 1 |
| 系列： | SPM |
| 电感： | 3.3µH |
| 电流： | 1.5A |
| 电流 - 饱和： | 2.8A |
| 电流 - 温升： | 1.5A |
| 容差： | ±20% |
| 屏蔽： | 屏蔽 |
| DC 电阻(DCR)： | 最大 210 毫欧 |
| 封装/外壳： | 0.126" L x 0.118" W x 0.047" H（3.20mm x 3.00mm x 1.20mm） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 工作温度： | -40°C ~ 125°C |
| 频率 - 测试： | 100kHz |
| 其它名称： | 445-8726-6 |
(2/25)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20131226 / inductor_commercial_power_spm_en.fm
相关PDF资料 |
PDF描述 |
|---|---|
| MIC2774N-31YM5 TR | IC SUPERVISOR DUAL 3.09 SOT23-5 |
| VE-B5J-EY-S | CONVERTER MOD DC/DC 36V 50W |
| 2-1906015-6 | CA 2.0MM OFNR 50/125,LC SEC GRN |
| H3KKH-1636M | IDC CABLE - HPK16H/AE16M/HPK16H |
| REC6-0512SRW/R8/A | CONV DC/DC 6W 4.5-9VIN 12VOUT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SPM3012T-3R3M-CA | 功能描述:3.3μH Unshielded Wirewound Inductor 1.5A 210 mOhm Max Nonstandard 制造商:tdk corporation 系列:SPM-CA 包装:剪切带（CT） 零件状态:有效 类型:绕线 材料 - 磁芯:铁粉 电感:3.3μH 容差:±20% 额定电流:1.5A 电流 - 饱和值:1.8A 屏蔽:无屏蔽 DC 电阻（DCR）:210 毫欧最大 不同频率时的 Q 值:- 频率 - 自谐振:- 等级:- 工作温度:-40°C ~ 125°C 频率 - 测试:100kHz 安装类型:表面贴装 封装/外壳:非标准 大小/尺寸:0.126" 长 x 0.118" 宽（3.20mm x 3.00mm） 高度 - 安装（最大值）:0.047"（1.20mm） 标准包装:1 |
| SPM3012T-3R3M-LR | 功能描述:3.3μH Shielded Wirewound Inductor 1.7A 185.4 mOhm Max Nonstandard 制造商:tdk corporation 系列:SPM-LR 包装:剪切带（CT） 零件状态:有效 类型:绕线 材料 - 磁芯:金属 电感:3.3μH 容差:±20% 额定电流:1.7A 电流 - 饱和值:2.8A 屏蔽:屏蔽 DC 电阻（DCR）:185.4 毫欧最大 不同频率时的 Q 值:- 频率 - 自谐振:- 等级:- 工作温度:-40°C ~ 125°C 频率 - 测试:100kHz 安装类型:表面贴装 封装/外壳:非标准 大小/尺寸:0.126" 长 x 0.118" 宽（3.20mm x 3.00mm） 高度 - 安装（最大值）:0.047"（1.20mm） 标准包装:1 |
| SPM3012T-4R7M | 制造商:TDK 功能描述:SMD INDUCTOR COIL FOR POWER LINE(WND-MAGNETIC SHIELDED) - Tape and Reel 制造商:TDK 功能描述:INDUCTOR 4.7UH 1.3A 20% SMD 制造商:TDK 功能描述:INDUCTOR SHIELDED 4.7UH 20% 制造商:TDK 功能描述:INDUCTOR, SHIELDED, 4.7UH, 20% 制造商:TDK 功能描述:INDUCTOR, SHIELDED, 4.7UH, 20% ;ROHS COMPLIANT: YES 制造商:TDK CORPORATION OF AMERICA 功能描述:Inductor |
| SPM3012T-4R7M-CA | 功能描述:4.7μH Unshielded Wirewound Inductor 1.3A 270 mOhm Max Nonstandard 制造商:tdk corporation 系列:SPM-CA 包装:剪切带（CT） 零件状态:有效 类型:绕线 材料 - 磁芯:铁粉 电感:4.7μH 容差:±20% 额定电流:1.3A 电流 - 饱和值:1.5A 屏蔽:无屏蔽 DC 电阻（DCR）:270 毫欧最大 不同频率时的 Q 值:- 频率 - 自谐振:- 等级:- 工作温度:-40°C ~ 125°C 频率 - 测试:100kHz 安装类型:表面贴装 封装/外壳:非标准 大小/尺寸:0.126" 长 x 0.118" 宽（3.20mm x 3.00mm） 高度 - 安装（最大值）:0.047"（1.20mm） 标准包装:1 |
| SPM3012T-4R7M-LR | 功能描述:4.7μH Shielded Wirewound Inductor 1.5A 264 mOhm Max Nonstandard 制造商:tdk corporation 系列:SPM-LR 包装:剪切带（CT） 零件状态:有效 类型:绕线 材料 - 磁芯:金属 电感:4.7μH 容差:±20% 额定电流:1.5A 电流 - 饱和值:2.4A 屏蔽:屏蔽 DC 电阻（DCR）:264 毫欧最大 不同频率时的 Q 值:- 频率 - 自谐振:- 等级:- 工作温度:-40°C ~ 125°C 频率 - 测试:100kHz 安装类型:表面贴装 封装/外壳:非标准 大小/尺寸:0.126" 长 x 0.118" 宽（3.20mm x 3.00mm） 高度 - 安装（最大值）:0.047"（1.20mm） 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。