- 您现在的位置：买卖IC网 > PDF目录382545 > SPT7861SCT (FAIRCHILD SEMICONDUCTOR CORP) 10-BIT, 40 MSPS, 160 mW A/D CONVERTER PDF资料下载
参数资料
| 型号： | SPT7861SCT |
| 厂商： | FAIRCHILD SEMICONDUCTOR CORP |
| 元件分类： | ADC |
| 英文描述： | 10-BIT, 40 MSPS, 160 mW A/D CONVERTER |
| 中文描述： | 1-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PQFP32 |
| 封装： | 7 MM, TQFP-32 |
| 文件页数： | 4/11页 |
| 文件大小： | 87K |
| 代理商： | SPT7861SCT |
4
6/25/01
SPT7861
APERTURE DELAY
Aperture delay represents the point in time, relative to the
rising edge of the CLOCK input, that the analog input is
sampled.
APERTURE JITTER
The variations in aperture delay for successive samples.
DIFFERENTIAL GAIN (DG)
A signal consisting of a sine wave superimposed on vari-
ous DC levels is applied to the input. Differential gain is the
maximum variation in the sampled sine wave amplitudes
at these DC levels.
DIFFERENTIAL PHASE (DP)
A signal consisting of a sine wave superimposed on vari-
ous DC levels is applied to the input. Differential phase is
the maximum variation in the sampled sine wave phases
at these DC levels.
EFFECTIVE NUMBER OF BITS (ENOB)
SINAD = 6.02N + 1.76, where N is equal to the effective
number of bits.
N =SINAD
–
1.76
6.02
INTEGRAL LINEARITY ERROR (ILE)
Linearity error refers to the deviation of each individual
code (normalized) from a straight line drawn from
–
FS
through +FS. The deviation is measured from the edge of
each particular code to the true straight line.
OUTPUT DELAY
Time between the clock
’
s triggering edge and output data
valid.
OVERVOLTAGE RECOVERY TIME
The time required for the ADC to recover to full accuracy
after an analog input signal 125% of full scale is reduced
to 50% of the full-scale value.
SIGNAL-TO-NOISE RATIO (SNR)
The ratio of the fundamental sinusoid power to the total
noise power. Harmonics are excluded.
SIGNAL-TO-NOISE AND DISTORTION (SINAD)
The ratio of the fundamental sinusoid power to the total
noise and distortion power.
TOTAL HARMONIC DISTORTION (THD)
The ratio of the total power of the first 9 harmonics to the
power of the measured sinusoidal signal.
SPURIOUS FREE DYNAMIC RANGE (SFDR)
The ratio of the fundamental sinusoidal amplitude to the
single largest harmonic or spurious signal.
INPUT BANDWIDTH
Small signal (50 mV) bandwidth (3 dB) of analog input
stage.
DIFFERENTIAL LINEARITY ERROR (DLE)
Error in the width of each code from its theoretical value.
(Theoretical = V
FS
/2
N
)
SPECIFICATION DEFINITIONS
相关PDF资料 |
PDF描述 |
|---|---|
| SPT7863SCS | 10-BIT, 40 MSPS, 160 mW A/D CONVERTER |
| SPT7863SCT | 10-BIT, 40 MSPS, 160 mW A/D CONVERTER |
| SPT7863 | 10-BIT, 40 MSPS, 160 mW A/D CONVERTER |
| SPT7871 | 10-BIT, 100 MSPS TTL A/D CONVERTER |
| SPT7871SCU | 10-BIT, 100 MSPS TTL A/D CONVERTER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SPT7861SCT_Q | 功能描述:模数转换器 - ADC 10-BIT A/D CONVERTER RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| SPT7861SCTX | 功能描述:视频模拟/数字化转换器集成电路 10BIT 40MSPS SaR aDC RoHS:否 制造商:Texas Instruments 输入信号类型:Differential 转换器数量:1 ADC 输入端数量:4 转换速率:3 Gbps 分辨率:8 bit 结构: 输入电压:3.3 V 接口类型:SPI 信噪比: 电压参考: 电源电压-最大:3.45 V 电源电压-最小:3.15 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:TCSP-48 封装:Reel |
| SPT7862 | 制造商:CADEKA 制造商全称:CADEKA 功能描述:10-BIT, 40 MSPS, DUAL-CHANNEL A/D CONVERTER |
| SPT7862SIT | 制造商:CADEKA 制造商全称:CADEKA 功能描述:10-BIT, 40 MSPS, DUAL-CHANNEL A/D CONVERTER |
| SPT7863 | 制造商:FAIRCHILD 制造商全称:Fairchild Semiconductor 功能描述:10-BIT, 40 MSPS, 160 mW A/D CONVERTER |
发布紧急采购，3分钟左右您将得到回复。