- 您现在的位置：买卖IC网 > Datasheet目录253 > SR05.TCT (Semtech)IC TVS ARRAY 2-LINE 5V SOT-143 Datasheet资料下载
参数资料
| 型号： | SR05.TCT |
| 厂商： | Semtech |
| 文件页数： | 4/9页 |
| 文件大小： | 0K |
| 描述： | IC TVS ARRAY 2-LINE 5V SOT-143 |
| 标准包装： | 1 |
| 系列： | RailClamp® |
| 电压 - 反向隔离（标准值）： | 5V |
| 电压 - 击穿： | 6V |
| 功率（瓦特）： | 500W |
| 电极标记： | 2 通道阵列 - 单向 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | TO-253-4，TO-253AA |
| 供应商设备封装： | SOT-143 |
| 包装： | 标准包装 |
| 产品目录页面： | 1357 (CN2011-ZH PDF) |
| 其它名称： | SR05DKR |
SR05
PROTECTION PRODUCTS
Applications Information
Device Connection Options for Protection of Two
High-Speed Data Lines
The SR05 TVS is designed to protect two data lines
from transient over-voltages by clamping them to a
fixed reference. When the voltage on the protected
line exceeds the reference voltage (plus diode V F ) the
steering diodes are forward biased, conducting the
transient current away from the sensitive circuitry.
Data lines are connected at pins 2 and 3. The nega-
tive reference (REF1) is connected at pin 1. This pin
should be connected directly to a ground plane on the
board for best results. The path length is kept as short
as possible to minimize parasitic inductance.
The positive reference (REF2) is connected at pin 4.
The options for connecting the positive reference are
as follows:
1. To protect data lines and the power line, connect
pin 4 directly to the positive supply rail (V CC ). In this
configuration the data lines are referenced to the
supply voltage. The internal TVS diode prevents
over-voltage on the supply rail.
2. The SR05 can be isolated from the power supply by
adding a series resistor between pin 4 and V CC . A
value of 10k ? is recommended. The internal TVS
and steering diodes remain biased, providing the
advantage of lower capacitance.
3. In applications where no positive supply reference
is available, or complete supply isolation is desired,
the internal TVS may be used as the reference. In
this case, pin 4 is not connected. The steering
diodes will begin to conduct when the voltage on
the protected line exceeds the working voltage of
the TVS (plus one diode drop).
ESD Protection With RailClamps
RailClamps are optimized for ESD protection using the
rail-to-rail topology. Along with good board layout,
these devices virtually eliminate the disadvantages of
using discrete components to implement this topology.
Consider the situation shown in Figure 1 where dis-
crete diodes or diode arrays are configured for rail-to-
rail protection on a high speed line. During positive
duration ESD events, the top diode will be forward
biased when the voltage on the protected line exceeds
the reference voltage plus the V F drop of the diode.
Data Line and Power Supply Protection Using Vcc as
reference
Data Line Protection with Bias and Power Supply
Isolation Resistor
Data Line Protection Using Internal TVS Diode as
Reference
? 2005 Semtech Corp.
4
www.semtech.com
相关PDF资料 |
PDF描述 |
|---|---|
| SR12.TCT | IC TVS ARRAY 2-LINE 12V SOT-143 |
| SR3.3.TCT | IC TVS ARRAY 2-LINE 3.3V SOT-143 |
| SR70.TCT | IC TVS ARRAY 2-LINE 300W SOT-143 |
| SRB22A2BBWNN | SWITCH ROCKER SPST 10A 125V |
| SRDA05-4.TBT | IC TVS ARRAY 4-LINE 5V 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SR05TG | 制造商:SEMTECH 制造商全称:Semtech Corporation 功能描述:RailClamp Low Capacitance TVS Diode Array |
| SR06 | 功能描述:XLR 连接器 BLU STRN RLF-25/BAG RoHS:否 制造商:Neutrik 标准:Standard XLR 产品类型:Connectors 型式:Female 位置/触点数量:3 端接类型:Solder 安装风格:Cable 方向:Vertical |
| SR060 | 制造商:Black Box Corporation 功能描述:ABC-RJ-45 RACK MOUNT |
| SR0602100ML | 制造商:ABC 制造商全称:ABC Taiwan Electronics Corp 功能描述:SMD POWER INDUCTOR |
| SR0602101KL | 制造商:ABC 制造商全称:ABC Taiwan Electronics Corp 功能描述:SMD POWER INDUCTOR |
发布紧急采购，3分钟左右您将得到回复。