参数资料
型号: SR1S14BM474X
厂商: EPCOS Inc
文件页数: 22/29页
文件大小: 0K
描述: VARISTOR 14VRMS W/RFI SUPP RAD
产品目录绘图: SR1(K20,S14B)M474X Front
SR1(K20,S14B)M474X Side
标准包装: 1,000
系列: SHCV
变阻器电压: 22V
电流 - 浪涌: 800A
电路数: 1
最大交流电压: 14VAC
最大直流电压: 16VDC
能量: 2.4J
封装/外壳: 径向
产品目录页面: 2358 (CN2011-ZH PDF)
其它名称: 495-4016
Leaded transient voltage/RFI suppressors (SHCVs)
SHCV series
7.5
Adhesive application
Thin or insufficient adhesive causes chips to loosen or become disconnected during curing.
Low viscosity of the adhesive causes chips to slip after mounting. It is advised to consult the
manufacturer of the adhesive on proper usage and amounts of adhesive to use.
7.6
Selection of flux
Used flux should have less than or equal to 0.1 wt % of halogenated content, since flux residue
after soldering could lead to corrosion of the termination and/or increased leakage current on the
surface of the component. Strong acidic flux must not be used. The amount of flux applied should
be carefully controlled, since an excess may generate flux gas, which in turn is detrimental to sol-
derability.
7.7
Storage of CTVSs
Solderability is guaranteed for one year from date of delivery for multilayer varistors, CeraDiodes
and ESD/EMI filters (half a year for chips with AgPd and AgPt terminations) and two years for
SHCV and CU components, provided that components are stored in their original packages.
Storage temperature:
Relative humidity:
25 ° C to +45 ° C
≤ 75% annual average, ≤ 95% on 30 days a year
The solderability of the external electrodes may deteriorate if SMDs and leaded components are
stored where they are exposed to high humidity, dust or harmful gas (hydrogen chloride, sulfurous
acid gas or hydrogen sulfide).
Do not store SMDs and leaded components where they are exposed to heat or direct sunlight.
Otherwise the packing material may be deformed or SMDs/ leaded components may stick togeth-
er, causing problems during mounting.
After opening the factory seals, such as polyvinyl-sealed packages, it is recommended to use the
SMDs or leaded components as soon as possible.
7.8
Placement of components on circuit board
Especially in the case of dual-wave soldering, it is of advantage to place the components on the
board before soldering in that way that their two terminals do not enter the solder bath at different
times.
Ideally, both terminals should be wetted simultaneously.
7.9
Soldering cautions
An excessively long soldering time or high soldering temperature results in leaching of the outer
electrodes, causing poor adhesion and a change of electrical properties of the varistor due to
the loss of contact between electrodes and termination.
Wave soldering must not be applied for MLVs designated for reflow soldering only.
Keep the recommended down-cooling rate.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 29
相关PDF资料
PDF描述
ESQ-105-34-S-D CONN RCPT 10POS .100" DUAL GOLD
V18AUMLA2220A VARISTOR MULTI AUTO 18V SMD 2220
RV1206JR-0727ML RES 27M OHM 5% 1206 TF
963130-2000-AR-PR CONN SOCKET SGL 30POS GOLD SMD
68685-444LF CONN RCPT 44POS .100" SNG ROW
相关代理商/技术参数
参数描述
SR1S14BM474XG 制造商:EPCOS 制造商全称:EPCOS 功能描述:Ceramic transient voltage suppressors
SR1UARU 功能描述:Supervisor Open Drain or Open Collector 1 Channel 6-UDFN (1.45x1) 制造商:stmicroelectronics 系列:Smart Reset?? 包装:剪切带(CT) 零件状态:有效 类型:重置计时器 受监控电压数:1 输出:开路漏极或开路集电极 复位:低有效 复位超时:可调节/可选择 电压 - 阈值:可调节/可选择 工作温度:-40°C ~ 85°C(TA) 安装类型:表面贴装 封装/外壳:6-UDFN 供应商器件封装:6-UDFN(1.45x1) 标准包装:1
SR1UBRUSH 制造商:Tripp Lite 功能描述:SMARTRACK 1U HORIZONTAL BRUSH STRIP - Bulk 制造商:Tripp Lite 功能描述:CABINET COOLING BRUSH STRIP 1URM 制造商:Tripp Lite 功能描述:Tripp Lite Rack Enclosure Cabinet Cooling Horizontal Brush Strip 1URM
SR1UPANEL10 制造商:Tripp Lite 功能描述:TRP - Bulk 制造商:Tripp Lite 功能描述:CABINET 10 PIECES COOLING PANEL 制造商:Tripp Lite 功能描述:Tripp Lite Rack Enclosure Cabinet 10 Pieces Cooling Blanking Panel 1URM
SR1UPANEL50 制造商:Tripp Lite 功能描述:TRP - Bulk 制造商:Tripp Lite 功能描述:50 PIECES COOL BLANK PANEL 1URM 制造商:Tripp Lite 功能描述:Tripp Lite Rack Enclosure Cabinet 50 Pieces Cooling Blanking Panel 1URM