- 您现在的位置：买卖IC网 > PDF目录40385 > SR2.8.TG 200 W, UNIDIRECTIONAL, SILICON, TVS DIODE PDF资料下载
参数资料
| 型号： | SR2.8.TG |
| 元件分类： | TVS二极管 - 瞬态电压抑制 |
| 英文描述： | 200 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| 封装： | PLASTIC PACKAGE-4 |
| 文件页数： | 5/8页 |
| 文件大小： | 106K |
| 代理商： | SR2.8.TG |
5
2003 Semtech Corp.
www.semtech.com
PROTECTION PRODUCTS
SR2.8
PIN Descriptions
Applications Information (continued)
IPP
I
SB
IPT
I
R
VRWM
V
PT VC
V
BRR
I
BRR
SB
Figure 1 - EPD TVS IV Characteristic Curve
the TVS clamping voltage and the voltage due to the
parasitic inductance (V
C(TOT) = VC + L di/dt) . Parasitic
inductance in the protection path can result in signifi-
cant voltage overshoot, reducing the effectiveness of
the suppression circuit. An ESD induced transient for
example reaches a peak in approximately 1ns. For a
30A pulse (per IEC 61000-4-2 Level 4), 1nH of series
inductance will increase the effective clamping voltage
by 30V
(V = 1x10-9 (30/1x10-9)). For maximum effectiveness,
the following board layout guidelines are recom-
mended:
Minimize the path length between the SR2.8 and
the protected line.
Place the SR2.8 near the RJ45 connector to
restrict transient coupling in nearby traces.
Minimize the path length (inductance) between the
RJ45 connector and the SR2.8.
EPD TVS Characteristics
The internal TVS of the SR2.8 is constructed using
Semtech’s proprietary EPD technology. The structure
of the EPD TVS is vastly different from the traditional
pn-junction devices. At voltages below 5V, high leak-
age current and junction capacitance render conven-
tional avalanche technology impractical for most
applications. However, by utilizing the EPD technology,
the SR2.8 can effectively operate at 2.8V while main-
taining excellent electrical characteristics.
The EPD TVS employs a complex nppn structure in
contrast to the pn structure normally found in tradi-
tional silicon-avalanche TVS diodes. The EPD mecha-
nism is achieved by engineering the center region of
the device such that the reverse biased junction does
not avalanche, but will “punch-through” to a conduct-
ing state. This structure results in a device with supe-
rior dc electrical parameters at low voltages while
maintaining the capability to absorb high transient
currents.
The IV characteristic curve of the EPD device is shown
in Figure 1. The device represents a high impedance
to the circuit up to the working voltage (V
RWM). During a
transient event, the device will begin to conduct as it is
biased in the reverse direction. When the punch-
through voltage (V
PT) is exceeded, the device enters a
low impedance state, diverting the transient current
away from the protected circuit. When the device is
conducting current, it will exhibit a slight “snap-back” or
negative resistance characteristic due to its structure.
This must be considered when connecting the device
to a power supply rail. To return to a non-conducting
state, the current through the device must fall below
the snap-back current (approximately < 50mA).
相关PDF资料 |
PDF描述 |
|---|---|
| SR20150AS | 20 A, 150 V, SILICON, RECTIFIER DIODE |
| SR2035AS | 20 A, 35 V, SILICON, RECTIFIER DIODE |
| SR2045CS | 20 A, 45 V, SILICON, RECTIFIER DIODE |
| SR2060AS | 20 A, 60 V, SILICON, RECTIFIER DIODE |
| SR2030AS | 20 A, 30 V, SILICON, RECTIFIER DIODE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SR29 | 制造商:PANJIT 制造商全称:Pan Jit International Inc. 功能描述:MINI SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER |
| SR290 | 制造商:SY 制造商全称:SY 功能描述:SCHOTTKY BARRIER RECTIFIER |
| SR290PT | 制造商:CHENMKO 制造商全称:Chenmko Enterprise Co. Ltd. 功能描述:SCHOTTKY BARRIER RECTIFIER |
| SR291A101KAA | 制造商:AVX Corporation 功能描述:CAP 100PF 100VDC C0G 10% RDL 2.54MM - Bulk |
| SR291A101KAR | 制造商:AVX Corporation 功能描述:CAP 100PF 100VDC C0G 10% RDL 2.54MM - Bulk |
发布紧急采购，3分钟左右您将得到回复。