| New Product ‘lllvv|$HAY? SS1 2P4SV Vlshay General SemiconductorSMD Photovoltaic solar Cell Protection schottky Rectifier FEATURES eSMP? Series - Very low profile — typical height of1.1 mm - Ideal for automated placement ROHS - Guardring for overvoltage protection C°MPL"‘"TK HALOGEN - Low fonlvard voltage drop, low power losses FREE - High efficiency1 - Low thermal resistance 2 - Meets MSL level 1, per J—STD-020, LF maximum peak of 260 °CT°'277A (SMPC) - compliant to RoHs Directive 2002/95/Ec and in K We‘ accordance to WEEE 2002/96/EC Camus |:: Ameg - Halogen-free according to IEC 61249-2-21 definition MEcHANIcAL DATAPR MARY cHARAcTERIsT s case: To_277A(sMPC)Molding compound meets UL 94 V-0 flammability ratingBase P/N-M3 - halogen?free, RoHS compliant, and Terminals: Matte tin plated leads, solderable perM3 Suffix meets JESD 201 class 1A whisker test commercial grade J-STD?002 and JESD 22?B102 VFat|F:12A WPICAL APPLIcATIoNs For use in solar cell junction box as a bypass diode for protection, using DC forward current without reverse bias. Maximum DC forward current (fig. 1) ‘ Peak forvvarcl surge current 10 ms single half sine-wave superimposed on rated load Non-repetitive avalanche energy at IAS : 2.0 A, T_| : 25 “C Operating junction and storage temperature range Junction temperature in DC forward current without reverse bias, t s 1 h l3’ -55tO+ 150Notes (1) Mounted on 30 mm x 30 mm Al PCB with 50 mm x 25 mm x 100 mm fin heat sink (2) Free air, mounted on recommended copper pad area (3) Meets the requirements of IEC 61215 Ed. 2 bypass diode thermal testDocument Number: 89127 For technical questions within your region, please contact one of the following: www.vishay.com Revision: 17-May-11 DiodesAmericas@vishay.com, DiodesAsia@vishav_com, DlodesEurope@vishav_com 19 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay_com/doc791000 |